Before Each Start-Up; How To Start; Customer Responsibilities; Maintenance - Delta A08184 Instruction Manual

Before Each Start-Up:

1. Place On/Auto/Off lever to "OFF".
2. Turn the regulator knob counterclockwise to set the outlet pressure to zero.
Attach hose and accessories. NOTE: The hose or accessory will require a
3.
quick connect plug if the air outlet is equipped with a quick connect.
rating for air tools and accessories. The regulator outlet pressure must
never exceed the maximum pressure rating.

How to Start:

1. Turn the On/Auto/Off lever to "ON/AUTO" and allow tank pressure to build.
Motor will stop when tank pressure reaches "cut-out" pressure.
2. Turn regulator knob clockwise to increase pressure and stop when desired
pressure is reached. The compressor is ready for use.
NOTE: Always operate the air compressor in well-ventilated areas free of
gasoline or other combustible vapors. If the compressor is being used to
operate a sprayer DO NOT place near the spray area.

Customer Responsibilities

Check Safety Valve
Drain Tank
Air Filter
Air compressor pump intake
and exhaust valves
1- more frequent in dusty or humid conditions
sources, compressed air, or moving parts. Personal injuries can occur.
Before performing any maintenance or repair, disconnect power source
from the compressor and bleed off all air pressure.
A08184
Too much air pressure causes a hazardous risk of
bursting. Check the manufacturer's maximum pressure

MAINTENANCE

Before
each
use
Unit cycles automatically when power is on. When
performing maintenance, you may be exposed to voltage
Daily
or after
Frequently
each
use
●
●
14- ENG
Yearly
● 1
●