Chapter 4: System Resources; Beep Codes; Flash Utility - TYAN TIGER 200T User Manual

Table of Contents

Chapter 4: System Resources

Note: If you experience problems with setting up your system, always check the following things in the

following order:

By checking these items, you will most likely find out what the problem might have been when setting up

your system. For more information on troubleshooting, check the Tyan website at http://www.tyan.com

Fatal errors, which halt the boot process, are communicated through a series or audible beeps. For exam-

ple, if the Phoenix BIOS POST can initialize the video but an error occurs, an error message will be dis-

played. If it cannot display video, it will convey a series of beeps.

If you hear one long beep followed by two short beeps, then a video problem has probably occured and

the BIOS is having difficulty initializing the video display. Any other beep sequences that may or may not

occur are probably due to memory problems.

Every BIOS file is unique for the motherboard it was designed for. Always check to see if you have the

newest BIOS available for your motherboard. For Flash Utilities, the newest BIOS downloads, and infor-

mation on how to properly use the Flash Utility with your motherboard, you must check the Tyan website:

http://www.tyan.com

Please be aware that by flashing your BIOS, you agree that in the event of a BIOS

flash failure, you must contact your dealer for a replacement BIOS. There are no

NOTE:

exceptions. Tyan does not have a policy of replacing BIOS chips directly with end

users. In no event will Tyan be held responsible for damage done to the BIOS by the

end user.

Tiger 200T S2505T

MEMORY, VIDEO, CPU

Table of Contents

Show Quick Links

Table of Contents

S2505t