TYAN THUNDER N3600R Manual page 57

3.4.9 DMI Event Logging
This setting allows you to configure DMI Event Logging.
Event Log Capacity
It reports the space available in the DMI event log. If set to [Full], the event log has
no more available space to store DMI events. (read only)
Event Log Validity
It reports the validity of the DMI event log. (read only)
View DMI Event Log
It allows you to view the contents of the DMI event log. (read only)
Clear All DMI Event Logs
Setting this to [Yes] will clear the DMI event log after rebooting.
Options: Yes / No
Event Logging
Select [Enabled] to allow logging of DMI events.
Options: Enabled / Disabled
Mark DMI Events as Read
Press [Enter] to mark all DMI events in the event log as read.
57
http://www.tyan.com