TYAN THUNDER N3600B Manual page 58

3.7.10 USB Configuration Sub-Menu
You can use this screen to view the USB Configuration Menu. Use the up
and down arrow (á/â) keys to select an item. Use the Plus and Minus (+/-)
keys to change the value of the selected option. The settings are described on
the following pages.
Main Advanced
USB Configuration
Module Version – X.XX.X-XX.X
USB Devices Enabled:
None
Legacy USB Support
USB 2.0 Controller Mode
BIOS EHCI Hand-Off
Feature
USB Configuration
Legacy USB Support
USB 2.0 Controller Mode
BIOS EHCI Hand-Off
BIOS Setup Utility
PCI/PnP Boot
[Enabled]
[HiSpeed]
[Enabled]
Option
Disabled
Enabled
Hi Speed
Full Speed
Enabled
Disabled
58
http://www.tyan.com
Security Chipset
Enables USB host
controllers.
¡ö ¡÷ Select Screen
¡ô¡õ Select Item
+/- Change Option
F1 General Help
F10 Save and Exit
ESC Exit
Description
Enables support for legacy
USB.
Configure the USB 2.0
controller in Hi Speed
(480Mbps) or Full Speed
(12Mbps).
This is a work around for OSes
without EHCI hand-off support.
The EHCI ownership change
should claim by EHCI driver.
Exit