TYAN THUNDER N3600B Manual page 49

3.7.4 Super IO Configuration Sub-Menu
You can use this screen to select options for the Super I/O settings. Use the
up and down arrow (á/â) keys to select an item. Use the Plus and Minus (+/-)
keys to change the value of the selected option
Main Advanced
Configure SCH5017 Super IO Chipset
Onboard Floppy Controller
Serial Port1 Address
Serial Port2 Address
Chassis Intrusion Detect
Watchdog Mode
Feature
Configure SCH5017 Super IO Chipset
Onboard Floppy Controller
Serial Port1 Address
Serial Port2 Address
Chassis Intrusion Detect
Watchdog Mode
BIOS Setup Utility
PCI/PnP Boot
[Enabled]
[3F8/IRQ4]
[2F8/IRQ3]
[Disabled]
[Disabled]
Option
Disabled
Allow BIOS to enable or disable the
floppy controller.
Enabled
3F8 IRQ4
Allow BIOS to select Serial Port1
3E8 IRQ4
Base Addresses.
2E8 IRQ3
Disabled
2F8 IRQ3
Allow BIOS to select Serial Part2
3F8 IRQ4
Base Addresses.
2E8 IRQ3
Disabled
Enable/Disable the function of
Disabled
chassis intrusion detection. When
chassis open event is detected,
Enabled
BIOS will record the event.
Disabled
Enabled
49
http://www.tyan.com
Security Chipset
Allows BIOS to enable
or disable Floppy
Controller.
¡ö ¡÷ Select Screen
¡ô¡õ Select Item
+/- Change Option
F1 General Help
F10 Save and Exit
ESC Exit
Description
Enable/Disable watchdog mode.
Exit