Board Installation; Unpacking - TYAN THUNDER 2 ATX Manual

Chapter 2

Board Installation

Unpacking

The mainboard package should contain the following:
S1696DLUA mainboard
One IDE 40-pin cable
One 34-pin floppy cable
One 50-pin narrow SCSI cable
One 68-pin wide SCSI cable
One Thunder 2 user' s manual
One SCSI and sound appendix package (appendices A, B, and C)
Two retention modules
The mainboard contains sensitive electric components which can be
easily damaged by static electricity, so the mainboard should be left in
its original packaging until it is ready to be installed.
With the power supply plugged in and turned off, touch an unpainted
area of the system chassis immediately before handling the mainboard
or any component. Doing so discharges any static charge your body
may have acquired.
12