Volvo S60 Owner's Manual page 175

2006 Volvo S60
Remove the wheel cap (where applicable) using the lug wrench in the tool bag.
With the car still on the ground, use the lug wrench to loosen the wheel bolts 1/2 - 1 turn. Turn the
bolts counterclockwise to loosen.
CAUTION:
The car must not be driven with wheels of different dimensions or with a spare tire other than the one
that came with the car. The use of different size wheels can seriously damage your car's transmission.
Correct tightening torque on wheel bolts must be observed. The wheel bolts should never be greased or
lubricated. The extended, chromed wheel bolts must not be used with steel rims, as they make it
impossible to fit the hub caps.
Locking wheel bolts can be used on both aluminum and steel wheels. If hub caps are used on steel
wheels, the locking wheel bolt should be mounted in the hole as far from the tire's inflation valve as
possible. It would otherwise not be possible to mount the hub cap on the wheel.
pg. 126 Wheels and tires
file:///K|/ownersdocs/2006/2006_S60/06s60_09.htm (18 of 21)12/30/2006 4:47:18 PM
Loosen the wheel bolts