Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Elsner 3093
Summarization of Contents
Clarification of signs
Safety Symbols Explanation
Explains warning symbols like Danger, Warning, Caution, and Attention.
Commissioning
Addressing the Device at the Bus
Details how to set the device's individual address on the KNX bus.
Transmission protocol
List of Communications Objects
Lists all communication objects, their DPT, and flags for the device.
Parameter setting
Behaviour on Power Failure and Restoration
Defines device behavior during power interruptions and restoration.
General Settings
Configures transmission delays after power-up and programming.
GPS Settings
Manages GPS receiver settings for date, time, and fault reporting.
Location Settings
Sets location coordinates for sun position calculation and UTC offset.
Rain Settings
Configures rain sensor activation and switching delays.
Night Detection Settings
Sets up night detection thresholds and switching delays.
Temperature Settings
Adjusts temperature measurement with offset and sets transmission parameters.
Temperature Threshold Values
Defines temperature thresholds for actions and their behavior.
Wind Settings
Configures wind measurement transmission and fault monitoring.
Wind Threshold Values
Sets wind speed thresholds for triggering actions.
Brightness Settings
Manages brightness measurement and its transmission for shade automation.
Brightness Threshold Values
Sets brightness thresholds for activating actions.
Twilight Settings
Configures twilight detection thresholds for actions.
Twilight Threshold Values
Sets twilight thresholds for specific actions.
Shading Overview
Introduces facade classification for shade control.
Classifying Facades for Control
Guides on how to divide buildings into facades for shade control.
Shade Settings
Configures sun position tracking and heat protection settings.
Facade Settings
Specifies shade conditions, brightness, and sun position for each facade.
Shadow Edge Tracking
Details settings for shadow edge tracking of sunshades.
Slat Tracking
Configures slat tracking for blinds based on orientation and width.
Shadow Edge and Slat Tracking
Explains the combined use of shadow edge and slat tracking for blinds.
Facade Orientation and Inclination
Defines how to set facade orientation and inclination angles.
Slat Types and Dimensions
Describes slat types and the importance of width and distance settings.
Slat Position (Horizontal Slats)
Details slat positioning for blinds with horizontal slats.
Slat Position (Vertical Slats)
Explains slat positioning for blinds with vertical slats.
Facade Actions
Defines actions executed when shade conditions are met.
Calendar Time Switch
Sets up time-based switching sequences for specific periods.
Calendar Clock Period Settings
Defines start and end dates for calendar time switch periods.
Calendar Clock Sequence Settings
Sets specific switch-on/off times for calendar timer sequences.
Weekly Time Switch
Configures different switching times for each day of the week.
Weekly Clock Sequence Settings
Sets switch-on and switch-off times for weekly timer sequences.
Using the Weekly Clock
Explains how weekly timer sequences can be used with OR connections.
Logic Gates Overview
Introduces the device's logic gates (AND/OR) and inputs.
AND Logic Settings
Defines inputs for AND logic gates.
Using AND Logic
Provides an example of using AND logic for sun automation.
AND Logic Connection Inputs
Lists all available inputs for AND logic gates.
OR Logic Settings
Introduces the OR logic functionality.
OR Logic Connection Inputs
Lists available inputs for OR logic gates, including AND logic inputs.
Need help?
Do you have a question about the 3093 and is the answer not in the manual?
Questions and answers