1. Manuals
  2. Brands
  3. Elsner Manuals
  4. Weather Station
  5. Suntracer KNX-GPS
  6. Manual

Elsner Suntracer KNX-GPS Manual

Hide thumbs Also See for Suntracer KNX-GPS:
Table of Contents

Advertisement

Quick Links

Download this manual
EN
Suntracer KNX-GPS
Weather Station
Item number 3093
Manual

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Suntracer KNX-GPS and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Elsner Suntracer KNX-GPS

Summary of Contents for Elsner Suntracer KNX-GPS

  • Page 1 Suntracer KNX-GPS Weather Station Item number 3093 Manual...

  • Page 3: Table Of Contents

    5.17.3. Connection inputs of the AND logic ............49 5.17.4. OR Logic ...................... 53 Elsner Elektronik GmbH • Sohlengrund 16 • D-75395 Ostelsheim • Germany Weather Station Suntracer KNX-GPS • from software version 1.00, ETS programme version 1.0 Status: 02.04.2024 • Subject to technical changes. Errors excepted.
  • Page 4 5.17.5. Connection inputs of the OR logic ............. 53 Elsner Elektronik GmbH • Sohlengrund 16 • D-75395 Ostelsheim • Germany Weather Station Suntracer KNX-GPS • from software version 1.00, ETS programme version 1.0 Status: 02.04.2024 • Subject to technical changes. Errors excepted.
  • Page 5 The change status (software version and date) can be found in the contents footer. If you have a device with a later software version, please check www.elsner-elektronik.de in the menu area "Service" to find out whether a more up-to- date version of the manual is available.
  • Page 6 Clarification of signs...

  • Page 7: Safety And Operating Instructions

    Elsner Elektronik is not liable for any changes in norms and standards which may occur after publication of these operating instructions. For information on installation, maintenance, disposal, scope of deliv- ery and technical data, please refer to the installation instructions.

  • Page 8: Commissioning

    The equipment is delivered with the individual address 15.15.255. This can be changed via the ETS. There is a button and a control LED on the circuit board inside the housing for this purpose. Weather Station Suntracer KNX-GPS • Status: 02.04.2024 • Errors excepted. Subject to technical changes.

  • Page 9: Transmission Protocol

    Night: Switching delay to non-night Input 9.010 C R W Temperature measurement value Output 9.001 C R T Temperature measurement value Input 1.017 C R W requirement min./max. Weather Station Suntracer KNX-GPS • Status: 02.04.2024 • Errors excepted. Subject to technical changes.
  • Page 10 Temperature TV 4: Absolute value Input / Output 9.001 C R W T U Temperature TV 4: Input 1.002 C R W Change (1:+ | 0: -) Weather Station Suntracer KNX-GPS • Status: 02.04.2024 • Errors excepted. Subject to technical changes.
  • Page 11 C R W from 1 to 0 Wind TV 3: Switching output Output 1.002 C R T Wind TV 3: Switching output block Input 1.002 C R W Weather Station Suntracer KNX-GPS • Status: 02.04.2024 • Errors excepted. Subject to technical changes.
  • Page 12 Twilight TV 1: Change (1:+ | 0: -) Input 1.002 C R W Twilight TV 1: Switching delay Input 9.010 C R W from 0 to 1 Weather Station Suntracer KNX-GPS • Status: 02.04.2024 • Errors excepted. Subject to technical changes.
  • Page 13 Facade 3: Status Output 1.002 C R T Facade 3: Movement position [%] Output 5.001 C R T Facade 3: Slat position [%] Output 5.001 C R T Weather Station Suntracer KNX-GPS • Status: 02.04.2024 • Errors excepted. Subject to technical changes.
  • Page 14 Switching output Weekly time switch Tuesday 3: Output 1.002 C R T Switching output Weekly time switch Tuesday 4: Output 1.002 C R T Switching output Weather Station Suntracer KNX-GPS • Status: 02.04.2024 • Errors excepted. Subject to technical changes.
  • Page 15 1.002 C R T AND Logic 1: 8-bit output A Output 5.010 C R T AND Logic 1: 8-bit output B Output 5.010 C R T Weather Station Suntracer KNX-GPS • Status: 02.04.2024 • Errors excepted. Subject to technical changes.
  • Page 16 1.002 C R T OR Logic 3: 8-bit output A Output 5.010 C R T OR Logic 3: 8-bit output B Output 5.010 C R T Weather Station Suntracer KNX-GPS • Status: 02.04.2024 • Errors excepted. Subject to technical changes.
  • Page 17 C R W Logic input 15 Input 1.002 C R W Logic input 16 Input 1.002 C R W Software version readable 217.001 C R T Weather Station Suntracer KNX-GPS • Status: 02.04.2024 • Errors excepted. Subject to technical changes.

  • Page 18: Parameter Setting

    • Blinks if signal object = 1 • Blinks if GPS reception OK ( see GPS Settings) • Blinks if GPS reception not OK ( see GPS Settings) Weather Station Suntracer KNX-GPS • Status: 02.04.2024 • Errors excepted. Subject to technical changes.

  • Page 19: Gps Settings

    Parameter setting 5.3. GPS Settings The Suntracer KNX-GPS weather station has a GPS receiver that provides the date and time, among other things. Since there should only be one message for date/time in a KNX-system (e.g. when using several GPS weather stations), the procedure for dealing with the time signal of the weather station is set here.

  • Page 20: Location

    • Austria • Germany • Portugal • France • Sweden • Greece • Switzerland • Italy • Spain • Luxembourg • Turkey • Netherlands • UK Weather Station Suntracer KNX-GPS • Status: 02.04.2024 • Errors excepted. Subject to technical changes.
  • Page 21 0200 Switchover time summer to winter [02 = hours, 00 = minutes] (standard time = winter time) • UTC+0100 Time zone [01 = hours, 00 = minutes] (-1200 ... +1400) Weather Station Suntracer KNX-GPS • Status: 02.04.2024 • Errors excepted. Subject to technical changes.

  • Page 22: Rain

    • 5 s … • 2 h Switch delay to no rain 5 min • 10 min … • 2 h after it is dry again Weather Station Suntracer KNX-GPS • Status: 02.04.2024 • Errors excepted. Subject to technical changes.

  • Page 23: Night

    Switching delay on night none • 5 s … 2 h Switching delay to non-night none • 5 s … 2 h Weather Station Suntracer KNX-GPS • Status: 02.04.2024 • Errors excepted. Subject to technical changes.

  • Page 24: Temperature

    The two values can be reset via object no. 18 “Tempera- ture measured value reset min./max.” Use min. and max. values No • Yes (Values are not retained after reset) Weather Station Suntracer KNX-GPS • Status: 02.04.2024 • Errors excepted. Subject to technical changes.

  • Page 25: Temperature Threshold Value 1 / 2 / 3 / 4

    Start threshold value in 0.1°C -300 … 800; 200 valid until first communication Weather Station Suntracer KNX-GPS • Status: 02.04.2024 • Errors excepted. Subject to technical changes.
  • Page 26 • on change to 1 • on change to 0 • on change and periodically • on change to 1 and periodically • on change to 0 and periodically Weather Station Suntracer KNX-GPS • Status: 02.04.2024 • Errors excepted. Subject to technical changes.
  • Page 27 Switching output sends on change to 1 and periodically if switching output = 0  send 0 Switching output sends on change to 0 and periodically Weather Station Suntracer KNX-GPS • Status: 02.04.2024 • Errors excepted. Subject to technical changes.

  • Page 28: Wind

    5.8.1. Wind threshold value 1 / 2 / 3 Each threshold value can be set individually. Threshold value / start threshold value in 1… 350; 80 0.1 m/s Weather Station Suntracer KNX-GPS • Status: 02.04.2024 • Errors excepted. Subject to technical changes.

  • Page 29: Brightness

    The twilight threshold values are used to perform certain actions when the illuminance exceeds or falls below an illuminance in the lux range. Use threshold value 1 / 2 / 3 No • Yes Weather Station Suntracer KNX-GPS • Status: 02.04.2024 • Errors excepted. Subject to technical changes.

  • Page 30: Twilight Threshold Value 1 / 2 / 3

    Each threshold value can be set individually. Threshold value / start threshold value in 1 … 1000; 200 All other settings corresponding to those of temperature threshold values (siehe , Seite 23). Weather Station Suntracer KNX-GPS • Status: 02.04.2024 • Errors excepted. Subject to technical changes.

  • Page 31: Shading

    (2, 4) must be controlled separately. Curved/round fronts should be divided into several facades (segments) to be controlled individually. Weather Station Suntracer KNX-GPS • Status: 02.04.2024 • Errors excepted. Subject to technical changes.

  • Page 32: Shade Settings

    Switching distance in °C 5...20 Heat protection is HPTV above = active (HPTV = Heat protection threshold value) HPTV - SD below = inactive (SD = Switching distance) Weather Station Suntracer KNX-GPS • Status: 02.04.2024 • Errors excepted. Subject to technical changes.

  • Page 33: Facade Settings

    Generally, the sun direction set here should correspond to the orientation of the façade. In addition, the shadows cast by roof overhangs, neighbouring buildings or Weather Station Suntracer KNX-GPS • Status: 02.04.2024 • Errors excepted. Subject to technical changes.
  • Page 34 (azimuth) and sun height (elevation). Example Azimuth setting: Top view: In the morning the building is fully shaded by surrounding trees. Weather Station Suntracer KNX-GPS • Status: 02.04.2024 • Errors excepted. Subject to technical changes.
  • Page 35 See chapter “Slat tracking” auf Seite 34. Type of tracking • No tracking • Shadow edge tracking • Slat auto-guide • Shadow edge tracking and slat auto-guide Weather Station Suntracer KNX-GPS • Status: 02.04.2024 • Errors excepted. Subject to technical changes.

  • Page 36: Shadow Edge Tracking

    More in chapter “Slat types and determination of width and distance” auf Seite 37. Slat orientation horizontal • vertical Slat width in mm 1 … 1000; 50 Slat distance in mm 1 … 1000; 50 Weather Station Suntracer KNX-GPS • Status: 02.04.2024 • Errors excepted. Subject to technical changes.

  • Page 37: Shadow Edge Tracking And Slat Tracking

    The slats can be set almost vertically without the sun shining directly into the room. Weather Station Suntracer KNX-GPS • Status: 02.04.2024 • Errors excepted. Subject to technical changes.

  • Page 38: Orientation And Inclination Of The Facade

    Facade 4: α + 270° Example: The building in the picture is tilted by α = 30°, i. e. the facade orientation is 30°, 120°, 210° and 300° Weather Station Suntracer KNX-GPS • Status: 02.04.2024 • Errors excepted. Subject to technical changes.

  • Page 39: Slat Types And Determination Of Width And Distance

    In order for the slat tracking to set the slats correctly, their width and distance from one another must be known. Horizontal Slats Vertical Slats Slat distance Slat width Slat Slat width distance Weather Station Suntracer KNX-GPS • Status: 02.04.2024 • Errors excepted. Subject to technical changes.

  • Page 40: Slat Position With Horizontal Slats

    (as with SMI drives, for example) or whether it is only possible in a few large steps (as with most standard drives). Weather Station Suntracer KNX-GPS • Status: 02.04.2024 • Errors excepted. Subject to technical changes.

  • Page 41: Slat Position With Vertical Slats

    Slat position at the beginning of movement UP 5.13.7.Slat position with vertical slats If an internal glare protector or screen with vertical slats is controlled by an Elsner blinds actuator, the position in which the slats are fully open is controlled or reported as the 0% slat position.

  • Page 42: Facade Actions

    • If slat tracking is activated, the calculated position is approached. Otherwise, the slat angle set here is approached. Then: Object “façade 1 status” = 1 Weather Station Suntracer KNX-GPS • Status: 02.04.2024 • Errors excepted. Subject to technical changes.
  • Page 43 Actions: • Façade status object is set to the value = 0 • Movement position can be changed. • Slat position can be changed. Weather Station Suntracer KNX-GPS • Status: 02.04.2024 • Errors excepted. Subject to technical changes.
  • Page 44 When sending periodically, the object “Façade X: status” is sent on the bus in a fixed cycle that can be set here. Send cycle 5 s … 2 h; 2 min (is sent only if "periodically" is selected) Heat protection: Weather Station Suntracer KNX-GPS • Status: 02.04.2024 • Errors excepted. Subject to technical changes.

  • Page 45: Calendar Time Switch

    A sequence sets the switch-on and switch-off time for each day of the set period. Sequence 1 not active • active Sequence 2 not active • active Weather Station Suntracer KNX-GPS • Status: 02.04.2024 • Errors excepted. Subject to technical changes.

  • Page 46: Calendar Clock Period 1 / 2 / 3, Sequence 1 /2

    Send cycle 5 s ... 2 h; 1 min (is sent only if "periodically" is selected) Weather Station Suntracer KNX-GPS • Status: 02.04.2024 • Errors excepted. Subject to technical changes.

  • Page 47: Weekly Time Switch

    Send cycle 5 s ... 2 h; 1 min (is sent only if "periodically" is selected) Weather Station Suntracer KNX-GPS • Status: 02.04.2024 • Errors excepted. Subject to technical changes.

  • Page 48: Use Of The Weekly Clock

    Four inputs can be defined for each logic gate. 1. / 2. / 3. / 4. Input • Do not use • all switching events that the device provides (see “AND logic connection inputs“) Weather Station Suntracer KNX-GPS • Status: 02.04.2024 • Errors excepted. Subject to technical changes.
  • Page 49 When sending periodically, the AND logic object is sent on the bus in a fixed cycle that can be set here. Send cycle 5 s … 2 h (is sent only if "periodically" is selected) Weather Station Suntracer KNX-GPS • Status: 02.04.2024 • Errors excepted. Subject to technical changes.

  • Page 50: Use Of The And Logic

    = 0  send 0 Switching output sends on change to 0 and periodically 5.17.2.Use of the AND logic Sun automation example Weather Station Suntracer KNX-GPS • Status: 02.04.2024 • Errors excepted. Subject to technical changes.

  • Page 51: Connection Inputs Of The And Logic

    Logic input 7 Logic input 7 inverted Logic input 8 Logic input 8 inverted Logic input 9 Logic input 9 inverted Logic input 10 Logic input 10 inverted Weather Station Suntracer KNX-GPS • Status: 02.04.2024 • Errors excepted. Subject to technical changes.
  • Page 52 Switching output bright 3 Switching output bright 3 inverted Switching output bright 4 Switching output bright 4 inverted Switching output twil 1 Switching output twil 1 inverted Weather Station Suntracer KNX-GPS • Status: 02.04.2024 • Errors excepted. Subject to technical changes.
  • Page 53 Switching output weekly clock Wednesday 1 Switching output weekly clock Wednesday 1 inverted Switching output weekly clock Wednesday 2 Switching output weekly clock Wednesday 2 inverted Weather Station Suntracer KNX-GPS • Status: 02.04.2024 • Errors excepted. Subject to technical changes.
  • Page 54 Weekly clock OR 2 Weekly clock OR 2 inverted Weekly clock OR 3 Weekly clock OR 3 inverted Weekly clock OR 4 Weekly clock OR 4 inverted Weather Station Suntracer KNX-GPS • Status: 02.04.2024 • Errors excepted. Subject to technical changes.

  • Page 55: Or Logic

    Switching output AND Logic 6 inverted Switching output AND Logic 7 Switching output AND Logic 7 inverted Switching output AND Logic 8 Switching output AND Logic 8 inverted Weather Station Suntracer KNX-GPS • Status: 02.04.2024 • Errors excepted. Subject to technical changes.
  • Page 56 Questions about the product? You can reach the technical service of Elsner Elektronik under Tel. +49 (0) 70 33 / 30 945-250 or service@elsner-elektronik.de We need the following information to process your service request: • Type of appliance (model name or item number) •...

This manual is also suitable for:

3093

Table of Contents