Table of Contents
Advertisement
Quick Links
Technical information
Installation instructions
Belaria
pro comfort (8-15)
®
Belaria
pro compact (8/100/300), (13/100/300)
®
Modulating air/water heat pump
Indoor unit
Belaria
pro compact (8/100/300)
®
Belaria
pro compact (13/100/300)
®
The heat pump is only allowed to be set up, installed
and taken into operation by customer service techni-
cians who have been authorised by Hoval for this pur-
pose. Electrical installation must be performed by a
licensed electrician.
Subject to modifi cations
Indoor unit
Belaria
pro comfort (8)
®
Belaria
pro comfort (13)
®
Belaria
pro comfort (15)
®
|
4 219 407 / 04 - 07/23
These instructions are applicable to the
following types:
1-Belaria
pro comfort (8)
®
1-Belaria
pro comfort (13)
®
1-Belaria
pro comfort (15)
®
1-Belaria
pro compact (8/100/300)
®
1-Belaria
pro compact (13/100/300)
®
Outdoor unit
EN
Advertisement
Table of Contents
Related Manuals for Hoval Belaria pro comfort 15
Summarization of Contents
Important notices
General safety instructions
General safety guidelines for installation and operation.
Outdoor unit installation regulations
Regulations for installing the outdoor unit.
Explanation of the symbols
Explanation of warning and information symbols used in the manual.
On-site system design for the outdoor unit
Guidelines for designing the outdoor unit installation on site.
Sound emissions
Information on sound emissions from the outdoor unit.
Drying out buildings or heating screed
Heat pump not designed for building drying or screed heating.
Frost protection
Measures for frost protection in unoccupied buildings.
Minimum temperature on the heating side
Minimum temperature requirements for defrosting.
Cleaning
How to clean the unit.
Rime on outdoor unit
Dealing with rime formation on the outdoor unit.
Transport of the indoor unit
Instructions for transporting the indoor unit.
Transport of the outdoor unit
Instructions for transporting the outdoor unit.
Storage of the outdoor unit
Guidelines for storing the outdoor unit.
Installation room of indoor unit
Requirements for the indoor unit installation room.
Standards and directives
Applicable standards and directives for installation.
Technical information
Description
Overview of the Belaria® pro heat pump system components.
Area of application
Suitable applications for the heat pump system.
Basic scope
Key features of the Belaria® pro comfort and compact models.
Short description of the WFA-200S automatic heat pump device
Description of the WFA-200S automatic heat pump device.
Technical data
Detailed technical specifications for the heat pump models.
Diagrams of areas of application
Visual representation of operational limits for heating and cooling.
Performance data
Performance data for heating and cooling according to EN 14511.
Configuration of the hydraulic connection pipes
How to configure the hydraulic connection pipes.
Dimensions and space requirement
Physical dimensions and space requirements for units.
Presentation of protection zones
Safety zones around the outdoor unit.
Installation of outdoor unit
Installation variants
Different ways to install the outdoor unit.
Diagram of wall penetration, ground and routing works
Illustrates wall penetration and routing of pipes and cables.
Transport of the outdoor unit
Guidelines for safely transporting the outdoor unit.
Installation of outdoor unit on site on concrete bases or floor plate
Instructions for mounting the outdoor unit on site foundations.
Grounding and lightning protection
Procedures for grounding and lightning protection of the outdoor unit.
Condensate drain
Measures for handling condensate discharge from the outdoor unit.
Installation of outdoor unit
Hydraulic connection
Connecting the hydraulic lines for the outdoor unit.
Electrical connection
Connecting the electrical supply to the outdoor unit.
Installation of indoor unit
Wall mounting of Belaria® pro comfort (8-15)
Instructions for wall mounting the Belaria® pro comfort indoor unit.
Hydraulic connection
Connecting the hydraulic lines for the indoor unit.
Hydraulic integration - heating
Integrating the heating system hydraulically for indoor units.
Hydraulic integration - heating and cooling
Integrating heating and cooling hydraulically for indoor units.
Electrical connection
Connecting the electrical supply to the indoor unit.
Initial commissioning
Flushing, filling and venting the heating circuit
Procedures for flushing, filling, and venting the heating circuit.
Water quality
Specifications for heating and domestic water quality.
Domestic water quality
Criteria for domestic water quality and anode selection.
Setting of the switching valve heating/domestic hot water
How to set or check the switching valve for heating/hot water.
Check of the mixer in heating circuit 1
Checking the 3-way mixer in heating circuit 1.
Manual operating mode
Understanding and using the manual operation settings.
Commissioning
Procedures for commissioning the heat pump system.
Maintenance and inspection
Checking the water level
How to check the water level in the heating system.
Refilling the heating system
Steps for refilling the heating system with water.
General cleaning
Guidelines for general cleaning of the indoor and outdoor units.
Cleaning the condenser
Instructions for cleaning the condenser unit.
Cleaning strainer and sludge separator
How to clean the strainer and sludge separator.
Cleaning and de-scaling the calorifier
Procedures for cleaning and de-scaling the calorifier.
Cleaning the outdoor unit
Instructions for cleaning the outdoor unit's components.
Fault description
Descriptions of common alarms and fault messages.
Need help?
Do you have a question about the Belaria pro comfort 15 and is the answer not in the manual?
Questions and answers