KYMCO XCITING 250 Owner's Manual page 35

Parking brake (XCITING 500 AFI/XCITING 500)
To apply the parking brake:
Pull in the parking brake lever (1) to lock the rear wheel.
To release the parking brake:
To release the parking brake lever while light pulling in
the lever and pushing the release knob (2).
Before riding, check that the parking brake indicator is
turned OFF and make sure that the rear brake is fully
released so there is no drag on the rear wheel.
Riding the scooter with the parking brake lever
will be hazardous. The rear brake will overheat
and it will reduce braking performance.
Operating the parking brake lever while riding
can cause rear wheel skid and loss of control.
Use the parking brake lever only when parking
and release lever before riding.
WARNING
To apply
(1)
To release
29
(2)