KYMCO XCITING 250 Owner's Manual page 32

Hide thumbs Also See for XCITING 250:
Table of Contents

Advertisement

Engine stop switch (3)
"
" position
The ignition circuit is off. The engine cannot start or run.
"
" position
The ignition circuit is on and the engine can run.
Hazard switch "
"(4)
"
"At this position, the right and left turn signal
lights wink together.
"OFF"At this position, the right and left turn signal
lights go out together.
!
Turn on hazard switch when parking or there is a special condition.
!
After the hazard switch is turned on, it will not reset automatically. Be sure to
reset it after use to avoid affecting the traffic safety.
!
When the signal lights are winking, the hazard switch does not work.
!
When the ignition switch is "OFF", the hazard light will still work.
!
If you leave the switch on for a long time, the battery may become totally
discharged. So be careful not to use the hazard lights for more than 30 minutes.
CAUTION
26
(4)
(3)

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents