To Calibrate An Rs-422 Or Rs-232 Device; To Control An Rs-422 Or Rs-232 Device; Device Controls In The Capture Panel - Adobe PREMIERE PRO 2 Manual

In the Device Control section of the Settings pane, specify the following options as needed:
5
Indicates how much before the In point Adobe Premiere Pro starts playing the tape before capture. The
Preroll Time
appropriate value varies depending on the device you are using.
Indicates the number of frames to adjust the timecode embedded in the captured video so that it
Timecode Offset
corresponds with the timecode number of the same frame on the source tape.

To calibrate an RS-422 or RS-232 device

1 Select File > Export > Export To Tape.
Click Options.
2
3 Enter the number of offset frames, as appropriate for your device, to the Delay Movie Start, Manual Edit Timing,
and Preroll boxes.

To control an RS-422 or RS-232 device

1 Select Edit > Preferences > Device Control.
From the Devices menu, select Serial Device Control.
2
3 Click Options.
In the VTR And Port Control section, select a protocol and port for your device.
4
In the Time Control section, select a time source and timebase for your device.
5

Device controls in the Capture panel

You can use the controls in the Capture panel to operate the device as you log clips. The jog control
you navigate quickly to nearby frames, and the shuttle control
play it forward or backward. The Record button
If you press the Rewind button
rewind when the tape is playing or paused, the device rewinds while displaying video in the preview.
If you press the Fast Forward button
If you fast forward when the tape is playing or paused, the device moves the tape forward while displaying video in
the preview.
If you press the Previous Scene
Next Scene button, the tape shuttles to the start point of the next scene and pauses.
You can also press the J, K, and L keys to control your device. J rewinds the tape; L fast forwards it, and K pauses it.
The speed of forward or reverse increases each time you press J or L. To rewind or forward one frame at a time, hold
down K and press J or L once. To slowly rewind or forward, hold down K+J or K+L.
To operate Capture panel controls using the keyboard, see the tool tips in the Capture panel. You can change the
shortcuts by choosing Edit > Keyboard Customization. You can also shuttle to a tape location by typing its timecode
into the Capture Panel's In Point or Out Point timecode display and pressing Enter.
lets you begin a manual capture.
when the tape is stopped, the device rewinds the tape at full speed. If you
when the tape is stopped, the device moves the tape forward at full speed.
button, the tape shuttles to the previous start point and pauses. If you press the
lets you change the speed of the tape as you
ADOBE PREMIERE PRO 2.0 70
User Guide
lets