Color Balance (Hls) Effect - Adobe PREMIERE PRO 2 Manual

Change To Color offers flexibility and options unavailable in the Change Color effect. These options include
tolerance sliders for hue, lightness, and saturation for exact color matching, and the ability to select the exact RGB
values of the target color that you wish to change to.
Change to Color effect: Original image (left), with saturation removed in the planet (center), and with light green changed to yellow in the
planet (right)
Adjust the following controls for the Change To Color effect:
Specifies the color that you wish to change. This selection determines which pixels will be affected by the
From
color change.
Specifies the color that you wish to change to. This control determines the target color for selected pixels.
To
Specifies the HLS channels that are affected:
Change
•
Affects hue only, leaving the original lightness and saturation untouched.
Hue
•
Affects hue and lightness only, leaving the original saturation untouched.
Hue And Lightness
•
Affects hue and saturation only, leaving the original lightness untouched.
Hue And Saturation
•
Hue, Lightness And Saturation
Specifies the color change operation the effect performs:
Change By
•
Performs a direct change of affected pixels to the target color.
Setting To Color
•
Transforms affected pixel values towards the target color, using HLS interpolation. The
Transforming To Color
amount of transformation depends on how close the selected To pixel color lies to the From color and also on the
Tolerance value.
Specifies the range of pixels that Change to Color affects. Expand this control to reveal separate sliders for
Tolerance
Hue, Lightness, and Saturation values. Higher Tolerance values expand the range of similar values. Lower Tolerance
values reduce the range of similar values.
Note: Use the View Correction Matte option to better identify which pixels are affected.
Specifies the edge smoothness of the selected change areas. Higher values create smoother and more
Softness
seamless transitions between areas affected by the color change and those left unaffected.
Specifies whether or not you are viewing a grayscale mask of the color values. White areas
View Correction Matte
indicate pixels that are affected by the color change. Black areas are left unchanged. Gray areas are only slightly
affected by the color change.
Note: To animate a color change, first select the initial color you wish to change; then set subsequent keyframes only for
the To color.

Color Balance (HLS) effect

The Color Balance (HLS) effect alters an image's levels of hue, luminance, and saturation.
Affects all the channels.
ADOBE PREMIERE PRO 2.0
314
User Guide