Related Manuals for Finish Thompson DB10 Series
Summarization of Contents
Important Information - Read Me First
Model Number and Serial Number
Record model and serial number for future reference and technical assistance.
Important Notice
Export regulations prohibit export of sealless centrifugal pumps without BIS license.
Chemical Reaction Disclaimer
User is responsible for material compatibility; manufacturer not liable for damage or injury.
Safety Precautions
Read manual before installation/operation. Follow all safety precautions to prevent injury or death.
Installation and Operation Precautions
Additional Safety Precautions for ATEX Compliant Pumps
Specific safety measures for ATEX compliant pumps, including protection controls and construction materials.
DB6, 6H, 7, 8, 9,10 Capabilities
Temperature Classification
Lists fluid temperatures and corresponding pump surface temperature classifications.
Cleaning
Pump must be cleaned regularly to avoid dust build up greater than 5 mm.
Start Up
Procedure for filling and starting the pump, ensuring it is full of liquid.
Section I - Assembly
Pumps with Motors
Instructions for assembling pumps that come with a motor.
Pumps Without Motors
Detailed steps for assembling pumps without a motor.
Section II - Installation
Mounting
Securely fasten motor feet to a solid foundation and ensure proper shimming.
Piping
Guidelines for suction and discharge piping, including NPSH, support, and valve placement.
Motor/Electrical
Instructions for safe motor installation, wiring, and electrical connections by qualified personnel.
Section III - Start-up and Operation
Shutdown
Procedure for safely shutting down the pump, including closing valves and turning off the motor.
Flush Systems
Steps for flushing the pump using a compatible fluid to clean internal components.
Optional Drain Installation
Instructions for drilling and tapping a 1/4" NPT drain hole in the impeller housing.
Section V - Disassembly
Impeller Replacement
Steps for removing and installing a new impeller onto the inner drive magnet assembly.
Outer Drive Replacement
Procedure for removing and replacing the outer drive magnet assembly from the motor shaft.
Thrust Ring Replacement
How to remove and install a new thrust ring into the impeller.
Bushing Replacement
Steps for pressing out the old bushing and pressing in a new one for the impeller/inner drive.
Section VII - Troubleshooting
No or Insufficient Discharge
Common causes and solutions for pumps with no or low discharge flow.
Insufficient Pressure
Troubleshooting tips for pumps that are not generating adequate pressure.
Loss of Prime
Diagnosing and resolving issues related to the pump losing its prime.
Section VIII - Warranty
Warranty Registration
Information on how to register your Finish Thompson pump for warranty purposes.
Part Number Explanation
Ordering Spare Parts
Guide on how to identify and order spare parts using the part number system.
Other FTI Products
Information about other product ranges offered by Finish Thompson Inc.
Need help?
Do you have a question about the DB10 Series and is the answer not in the manual?
Questions and answers