Advertisement
Copyright E Briggs & Stratton Corporation,
Milwaukee, WI, USA. All rights reserved.
Briggs & Stratton is a registered trademark
of Briggs & Stratton Corporation.
English
en
Operator's Manual
en
Manual del Operario
es
Manuel de l'opérateur
fr
Model 80000
E Seriest
300e Seriest
450e Seriest
Español
Français
es
Model 90000
fr
E Seriest
500e Seriest
EX Seriest 550e Seriest
550ex Seriest
575ex Seriest
600e Seriest
625ex Seriest
Form No. 381266TRI
Revision: E
Advertisement
Table of Contents
Related Manuals for Briggs & Stratton 600e Series
Summarization of Contents
Operator Safety Introduction
General Safety & Hazard Awareness
Overview of engine hazards, risks, and safe operating practices.
Safety Symbols and Hazard Definitions
Explanation of warning symbols, signal words, and hazard classifications.
Key Operational & Chemical Warnings
Warnings regarding chemical exposure, engine application, and initial setup.
Fuel Safety and Handling
Fuel Flammability and Explosion Risks
Precautions for handling flammable fuel and preventing explosions.
Safe Fueling, Transport, and Storage
Guidelines for adding fuel, transporting, and storing fuel safely.
Engine Operation Safety
Kickback, Rotating Parts, and Hot Surfaces
Warnings about kickback, entanglement with moving parts, and hot engine surfaces.
Carbon Monoxide and Start-up Hazards
Risks of CO poisoning, unintentional start-up, fire, and electric shock.
Pre-Repair and Spark Testing Safety
Safety steps before repairs and for testing engine spark.
Engine Features and Controls
Component Identification Overview
Identification of key engine parts and controls.
Oil Selection and Checking
Guidance on choosing oil viscosity and checking oil levels.
Fueling and Starting the Engine
Instructions for adding fuel and starting the engine safely.
Starting and Stopping Procedures
Starting System Types
Description of ReadyStart and Primer starting systems.
Engine Stop Methods
Procedures for stopping the engine using switches or throttle controls.
Maintenance and Repair Safety
General Maintenance and Tipping Warnings
Safety notes for maintenance, tipping, and emissions control service.
Pre-Adjustment and Repair Safety
Essential safety checks before performing adjustments or repairs.
Scheduled Maintenance Tasks
Maintenance Intervals and Actions
Tasks for first 5, 8, 25, 50 hours, and annual service.
Key Component Maintenance
Guides for inspecting muffler, replacing spark plug, changing oil, and servicing air filter.
Engine Adjustment Restrictions
Carburetor and Speed Control Limits
Warnings against unauthorized adjustments to engine speed or carburetor.
Engine Cleaning, Specifications, and Storage
Air Cooling System Cleaning
How to clean the cooling system and maintain airflow.
Engine Specifications and Parts
Technical data, tune-up specs, and common service parts.
Storage Preparation and Fuel Care
Guidelines for storing the engine and maintaining fuel quality.
Engine Warranty Information
Limited Warranty Terms and Exclusions
Overview of warranty coverage, terms, and conditions not covered.
Obtaining Warranty Service and Support
Information on warranty claim procedures and finding authorized service dealers.
Need help?
Do you have a question about the 600e Series and is the answer not in the manual?
Questions and answers