Related Manuals for HPE Alletra 5010
Summarization of Contents
Install the HPE Storage Array
Network Considerations for Installation
Information to help determine network topology and plan IP address configuration.
Network Topology Options
Details on network topologies: shared, two dedicated, advanced, and Fibre Channel.
IP Address Types and Usage
Explanation of Management, Discovery, and Data IP addresses for array communication.
Firewall Rules for Storage SAN
Required firewall rules for Storage SAN communication with specific ports and protocols.
Subnet Configuration and Traffic Types
Defines subnets, MTU settings, VLAN IDs, and traffic segregation types (Management, Data).
Interface Pairs for Network Connectivity
Defines iSCSI and Fibre Channel interface pairs for high availability and redundancy.
Preparation for Array Installation
Installation Checklist Items
List of information required to complete the storage array setup process.
Rack Mount Safety Precautions
Essential safety precautions for installing storage arrays or expansion shelves in a rack.
Array Installation and Initial Setup
Array Installation Procedure
Step-by-step instructions for installing the HPE storage array into a rack.
Starting the Array
Procedure to start the array after a shutdown.
Shutting Down the Array
Instructions for safely shutting down the array using GUI or CLI.
Restarting the Array
Procedure to restart the array using the Command Line Interface (CLI).
Initial Setup and Cloud Integration
HPE Alletra Setup Service
Guides for downloading and installing the HPE Storage Toolkit for Windows.
Storage Setup Manager for Windows
Steps to complete initial setup using the Windows Setup Manager.
Array CLI Initial Setup
Procedure for initial setup using the Command Line Interface (CLI).
Connecting Array to HPE GreenLake
Wizard to guide connecting the storage array to HPE GreenLake.
Array Management and Cloud Services
HPE GreenLake and Data Services Cloud Console
Overview of HPE GreenLake and Data Services Cloud Console.
HPE Cloud Enablement Steps
Enabling the array for cloud management via subscriptions and user accounts.
Assigning Array to Cloud Services
Process to add and assign the array to Data Services Cloud Console.
Array Components and Status Monitoring
Array Component Identification
Identification of key array components including front and rear panels.
Array LEDs and Status Indicators
Description of front LEDs for power, status, and controller information.
Controller States and Status
Explanation of controller states like Active, Standby, Solo, Unknown, and Stale.
Check Array Model and OS Version
Procedure to check array model, OS version, and controller operating states.
Expansion Shelf Installation and Management
Expansion Shelf Installation Procedure
Step-by-step guide for installing and activating expansion shelves.
Expansion Shelf Components and LEDs
Overview of expansion shelf components and front panel LEDs.
Shutting Down an Expansion Shelf
Procedure to shut down an expansion shelf.
Find Expansion Shelf Serial Number
Methods to find the serial number of an expansion shelf using GUI or CLI.
Maintenance Procedures
Drive Maintenance Procedures
Procedures for maintaining drives, including replacing failed SSDs and HDDs.
Controller Maintenance
Procedures for replacing components on a controller, like NICs or HBAs.
Replacing PCIe Cards
Procedure to replace network interface cards (NICs) or host bus adapters (HBAs).
Replacing SFP Transceivers
Procedure to replace a failed SFP transceiver on the storage array.
Expander and Power Supply Maintenance
Procedures for replacing expanders and power supply units.
Chassis Maintenance
Procedure for replacing the chassis of the HPE storage array.
Array Upgrade Procedures
Upgrading Drives and Cache
Procedures for adding HDDs and SSDs to increase array capacity.
Upgrading PCIe Cards
Procedure to upgrade network interface cards or host bus adapters.
Controller Upgrade Process
Procedures for upgrading controllers, including model compatibility.
Hardware and Model Specifications
Chassis Dimensions, Weight, and Environment
Physical specifications including dimensions, weight, and operating environment.
Electrical Requirements and Power Supplies
Details on power supply types, voltage, current, and connectors.
Connectors, Ports, and SFP Specifications
Information on array connectors, ports, SFPs, and cabling.
Model Specific Specifications
Detailed specifications for various HPE Alletra and Nimble Storage models.
Troubleshooting System Temperature
Understanding Fans and Sensors
Explanation of cooling fans, temperature sensors, and alert generation.
External Temperature Monitoring
Table detailing results based on external temperature readings.
Responding to Temperature Alerts
Actions to take for temperature alerts, including checking airflow and cooling.
Regulatory and Safety Information
Global Regulatory Warnings
Regulatory warnings for different regions like EU, Israel, Japan, Saudi Arabia, and South Korea.
USA FCC Compliance
Compliance information related to FCC rules for Class A digital devices.
General Safety Warnings
General safety warnings, including access restrictions and electrical safety precautions.
Battery Safety Information
Information and warnings related to battery safety and handling.
Need help?
Do you have a question about the Alletra 5010 and is the answer not in the manual?
Questions and answers