Ext Sync Playback; Timer Playback; Repeat Playback - Tascam CD-RW901SL Owner's Manual

IMPORTANT SAFETY INSTRUCTIONS

EXT SYNC playback

In this mode, the unit will play back in synchronization
with the clock selected as digital input source (OPTICAL,
COAXIAL, AES/EBU).
When stopped, use the EXT SYNC option in the PLAY
sub-menu (see "Operation basics" on page 16) to set the
external synch playback mode on.
Select the input source for sync playback.
NOTE
When the EXT SYNC is on, and when the unit detects
a signal other than 44.1kHz, synchronization with the
clock of the selected digital input source may fail, and
EXT CLK Err! will be displayed. The audio playback may also
be affected.
If the selected digital input source is at 48kHz, using the
48k Fs adjustment function allows the audio to be played
back at the correct pitch.

Timer playback

By using an external timer, you can set the CD-RW901SL
to play the loaded disc automatically when the unit is
turned on by the timer.
1. First, plug the power cord of the CD-RW901SL into
the power outlet of the timer.
2. Load a disc into the unit.
3. Switch the switch on PLAY to enable timer
TIMER
function on for the desired deck.
When Timer playback has been turned on, the
timer icon lights up in the display.
NOTE
The indicator flashes when a disc is not loaded into
the unit.

Repeat playback

1. Press the REPEAT key to turn on the repeat mode.
In this mode, all the tracks on the disc are played
continuously. The display shows
indicator lights up
REPEAT
During playback, if the repeat mode is turned on,
playback continues as before, and when the last track
finishes, playback resumes from the first track.
If the repeat mode is turned on when the deck is
stopped, press the PLAY
4 − Playback operations
Timer indicator
and the
Repeat ON
.
key to begin operation.
When stopped, and when in playback or playback ready
mode, press the SYNC REC
ment function on or off. When the function is on,
will be displayed.
A d j
The setting remains until the EXT SYNC function is set to
off, and even the power is turned off.
NOTE
When the 48k Fs Adjustment is on, and when the unit
detects a signal other than 48kHz, synchronization
with the clock of the selected digital input source may
fail. The audio playback may also be affected.
When the 48k Fs adjustment is on, the Pitch control
and Key control functions cannot be used.
The EXT SYNC playback function does not operate
with MP3 discs.
4. Set the timer to the desired time. Consult the timer'
s operation manual for details. At the set time, the
power to the CD-RW901SL will be turned on, and
playback will automatically begin.
2. Press the REPEAT key again to turn off repeat
mode. Repeat OFF appears then the
turns off.
NOTE
Combining the repeat mode with the program,
Single-track playback and Random playback functions
will enable Program repeat, Single-track repeat and
Random repeat operations, respectively.
Settings for the repeat playback mode remain after
power is turned off, except the specified A-B section
(see "A to B repeat playback" on page 22).
key to turn the 48k Fs adjust-
4 8 k F s
REPEAT indicator
1 1
TASCAM CD-RW901SL TASCAM CD-RW901SL