Index Search; Time Skip; Playback Modes; Continuous Playback - Tascam CD-RW901SL Owner's Manual

IMPORTANT SAFETY INSTRUCTIONS

Index search

This Index search function allows you to search indexes
within a track that were assigned during recording (see
"Automatically Incrementing index numbers" on page 29).
Use the SKIP MODE in the PLAY menu (see "Operation
basics" on page 16) and select the item "Index". The
MULTI JOG dial or MENU (+/-)
can be used to select.
appears on the display.
I n d e x X X

Time skip

While in playback or playback ready mode, Time skip
function allows you to move the playback position
forwards or backwards by a minute.
Use the SKIP MODE in the PLAY menu (see "Operation
basics" on page 16) and select the item "Time". The
dial or key on the remote control can be
JOG MENU (+/-)
used to select.
Pressing the or
˚/¥ ∆/˙
tion one minute forwards or backwards. The unit locates
and starts playback at that point.
When the key is pressed in playback ready mode, the unit
locates and standbys at that point.
NOTE
If the ∆/˙ key is pressed at a time less than one
minute from the begging of a track, the unit skips to
the head of the track.

Playback modes

There are four different playback modes. The selected
mode will be indicated on the left of the display.
•
Continuous playback mode (default setting): no indica-
tion lamp
•
Single playback mode:
SINGLE
•
Program playback mode:
•
Random playback mode:
The playback mode can be selected using the
key on the remote control unit. Pressing the key changes
the playback mode on the display in the following order:
Continue ® Single ® Program ® Random
You can also select the playback mode using the PLAY
MODE option in the PLAY sub-menu (see "Operation
basics" on page 16). Turning the

Continuous playback

Programing is cancelled, and playback continues in the
normal order.
1. When stopped, set the mode to display
Mode>Cont .
key on the remote control
MULTI
key moves the playback posi-
is lit
PROGRAM red lamp is lit
RANDOM red lamp is lit
P.MODE
dial clock-
MULTI JOG
Continue or
4 − Playback operations
Select a track you want to assign indexes to, and put the
unit in playback or playback ready mode.
Use the or
˚/¥
The unit locates to the index selected, and starts play-
back at that point, or goes into playback ready mode after
moving to that point.
NOTE
The Index search function does not operate with
MP3 discs.
If the ˚/¥ key is pressed at less than one minute
from the end of a track, the unit skips to the begin-
ning of the next track. However, if the current track is
the last track on a disc or is the last track in program
playback mode, the unit stops and goes into playback
ready mode when the last track ends.
If the ∆/˙ key is pressed at less than one second
from the begging of a track, the unit skips to one
minute before the end of the previous track. Howev-
er, if the current track is the first track on a disc or in
program playback, and also when in random play-
back, the unit skips to the beginning of the current
track, and goes into playback ready mode.
The Time skip function does not operate with MP3
discs.
wise changes the playback mode shown on the display in
the following order:
® Mode>Random
Pressing the
MENU
returns to normal mode from the menu mode.
While the mode can be changed from any playback mode,
the explanation in this manual will assume the user is
starting from the Continuous mode.
NOTE
The selected playback mode remains after power is
turned off. However, the program playback mode will
be cleared to "Continuous" mode when the power is
turned off.
2. Press the
PLAY
the track number.
key to search through the indexes.
∆/˙
Mode>Cont®Mode>Single®Mode>Program
key or pushing the
MULTI JOG
key to begin playback in order of
TASCAM CD-RW901SL TASCAM CD-RW901SL
dial
1 1