Automatic Track Division With Trim Function; Automatically Incrementing Index Numbers; Manually Divide Track; Manually Incrementing Index Numbers - Tascam CD-RW901SL Owner's Manual

5 − Recording
IMPORTANT SAFETY PRECAUTIONS

Automatic track division with trim function

When Auto Track is set to either Level or DD mode,
it is possible to trim the automatic track division point
using A_TRK TRIM option in the REC sub-menu (see
"Operation basics" on page 16). This function allows you
to slip the start time of the track increment forwards or
backwards.
NOTE
When Auto Track mode is set to Time, the value set in
Auto Track Trim is ignored.

Automatically Incrementing index numbers

When recording with auto track function, when INDEX
INC is set to on (see "Operation basics" on page 16), the
unit overrides the setting of the automatic track division,
and instead of incrementing track numbers, it increments
the index numbers within a track.
Use the MULTI JOG dial or
control to switch INDEX INC on or off.

Manually divide track

While recording is taking place, press the
The current track number is incremented by one.
For details of automatic track division while recording, see
"Automatic track division" on page 29.
NOTE
According to the "Red Book" (the specification for
audio CDs), a track cannot be less than four seconds

Manually incrementing index numbers

This function allows you to manually assign index numbers
1. Start recording.
2. Press the key at the point you want to assign
CALL
an index number.
I n d e x X X
number, will be displayed.

Rec mute function

The Rec mute function allows instant cut-off of the input
signal, and records four seconds of silence on the disc.
While recording is in progress, press the
on the remote control.
The display shows the Rec Mute
displaying the current level and the monitored sound is cut.
After about four seconds, the unit enters record ready mode.
NOTE
This function is only available from the remote
control unit.
0 0
TASCAM CD-RW901SL TASCAM CD-RW901SL
MENU (+/-) keys on the remote
key.
RECORD
where shows the
X X
key
REC MUTE
flashing, the meters stop
The available trim value is from -125 through +125 frames.
Use the MULTI JOG
control to adjust the trim value.
where
I n d e x X X X X
display.
NOTE
The maximum index number within a track is 99.
When the unit reaches 99, it will increment the track
number and start assigning index numbers counting
from one.
in length, and there can be a maximum of 99 tracks
on an audio CD. Bear these limitations in mind when
adding track divisions.
This operation can not be applied while recording
track 99.
.
NOTE
The maximum index number within a track is 99.
When the unit reaches 99, it will increment the track
number and start assigning index numbers counting
from one.
dial or MENU (+/-) keys on the remote
is index numbers will appear on the