Table of Contents
Advertisement
EXT SYNC playback
In this mode, the unit will play back in synchronization
with the clock selected as digital input source (OPTICAL,
COAXIAL, AES/EBU).
When stopped, use the EXT SYNC option in the PLAY
sub-menu (see "Operation basics" on page 16) to set the
external synch playback mode on.
Select the input source for sync playback.
NOTE
When the EXT SYNC is on, and when the unit detects
a signal other than 44.1kHz, synchronization with the
clock of the selected digital input source may fail, and
EXT CLK Err! will be displayed. The audio playback may also
be affected.
If the selected digital input source is at 48kHz, using the 48k
Fs adjustment function allows the audio to be played back at
the correct pitch.
Timer playback
By using an external timer, you can set the CD-RW901MKII
to play the loaded disc automatically when the unit is turned
on by the timer.
1. First, plug the power cord of the CD-RW901MKII
into the power outlet of the timer.
2. Load a disc into the unit.
TIMER
3. Switch the
switch on PLAY to enable timer
function on for the desired deck.
When Timer playback has been turned on, the
timer icon lights up in the display.
NOTE
The indicator flashes when a disc is not loaded into
the unit.
Repeat playback
REPEAT
1. Press the
key to turn on the repeat mode.
In this mode, all the tracks on the disc are played
continuously. The display shows
indicator lights up
REPEAT
During playback, if the repeat mode is turned on,
playback continues as before, and when the last track
finishes, playback resumes from the first track.
If the repeat mode is turned on when the deck is
PLAY
stopped, press the
4 − Playback operations
Timer indicator
and the
Repeat ON
.
key to begin operation.
When stopped, and when in playback or playback ready
mode, press the SYNC REC key to turn the 48k Fs
adjustment function on or off. When the function is on, 4 8 k
F s A d j will be displayed.
The setting remains until the EXT SYNC function is set to off,
and even the power is turned off.
NOTE
When the 48k Fs Adjustment is on, and when the unit
detects a signal other than 48kHz, synchronization
with the clock of the selected digital input source may
fail. The audio playback may also be affected.
When the 48k Fs adjustment is on, the Pitch control
and Key control functions cannot be used.
The EXT SYNC playback function does not operate
with MP3 discs.
4. Set the timer to the desired time. Consult the
timer's operation manual for details. At the set
time, the power to the CD-RW901MKII will be
turned on, and playback will automatically begin.
REPEAT
2. Press the
key again to turn off repeat
mode.
appears then the
Repeat OFF
turns off.
NOTE
Combining the repeat mode with the program,
Single-track playback and Random playback functions
will enable Program repeat, Single-track repeat and
Random repeat operations, respectively.
Settings for the repeat playback mode remain after
power is turned off, except the specified A-B section
(see "A to B repeat playback" on page 22).
TASCAM CD-RW901MKII
indicator
REPEAT
21
Advertisement
Table of Contents
