Cover (Cdm) Block; Dvd Mechanism Deck Block - Sony HCD-SLK1i - Dvd Receiver Service Manual

2-7.

COVER (CDM) BLOCK

6 cover (CDM) block
3 wire (flat type) (23 core)
(CN407)
1 wire (flat type) (11 core)
(CN412)
2-8.

DVD MECHANISM DECK BLOCK

Note 1: When disconnecting the wire (fl at type) (24 core) of optical pick-up block, solder the short-land.
5 two claws
8 Solder the short-land.
Note 2: When assembling the optical pick-up block,
remove the solder of short-land after
connecting the wire (flat type) (24 core).
5 coating clip
– Rear top view –
3 two screws
(BVTP2.6)
4 screw
4 four screws
(BVTP2.6)
(BVTP2.6)
2 wire (flat type) (27 core)
(CN406)
sheet
Note: Please spread a sheet under a set
not to injure front panel.
9 wire (flat type) (24 core)
(CN001)
7 FFC holder
4
6 two claws
– DVD mechanism deck block bottom view –
HCD-SLK1i/SLK2i
2 connector
(CN202)
1 wire (flat type) (7 core)
(CN201)
6 two claws
0 DVD mechanism
deck block
3 screw
(BVTP2.6)
13