Controlling Other Components; Preprogrammed Remote Control Codes; Looking Up For Remote Control Code - Onkyo TX-NR1007B Instruction Manual

Controlling Other Components

You can use the AV receiver's remote controller
(RC-745M) to control your other AV components,
including those made by other manufacturers. This sec-
tion explains how to enter the remote control code for a
component that you want to control: DVD, TV, VCR,
etc.
• Learn commands directly from another component's
remote controller (see page 145).
• Program the ACTIVITIES buttons to perform a
sequence of up to 32 remote control actions (see
page 146).
Preprogrammed Remote Control
Codes
The following REMOTE MODE buttons are prepro-
grammed with remote control codes for controlling the
components listed. You do not need to enter a remote
control code to control these components.
For details on controlling these components, see the
pages indicated.
Onkyo DVD player (page 137)
Onkyo CD player (page 140)
Onkyo cassette recorder with
ENTER
SETUP
132

Looking up for Remote Control Code

You can look up for appropriate remote control code
from onscreen setup menu.
Note:
This setting can be carried out by using Onscreen Setup
Menu only.
1
2
(page 142)
3
RECEIVER
4
Press the [RECEIVER] button fol-
lowed by the [SETUP] button.
The main menu appears onscreen.
If the main menu doesn't appear, make
sure the appropriate external input is
selected on your TV.
Use the Up and Down [ ]/[ ] but-
tons to select "8. Remote Con-
troller Setup", and then press
[ENTER].
8. Remote Controller Setup
1. Remote Mode Setup
2. Activities Setup
Use the Up and Down [ ]/[ ] but-
tons to select "1. Remote Mode
Setup", and then press [ENTER].
8–1. Remote Mode Setup
TV
DVD/BD
VCR/DVR
CBL/SAT
GAME
AUX
TV/TAPE
CD
PHONO
Use the Up and Down [ ]/[ ] but-
tons to select remote mode, and
then press [ENTER].
The category selection menu appears.
8–1. Remote Mode Setup
TV
TV/DVD
TV/VCR
TV