Checking Adjustment Of Selector Lever Cable And Starter Locking/Backup Light Switch - Porsche 928 Workshop Manual

928 Automatic Transmission/Controls, Case
37
CHECKING ADJUSTMENT OF SELECTOR LEVER CABLE AND
STARTER LOCKING/BACKUP LIGHTSWITCH
Move selector lever to position "N". Run
engine at fast idle speed.
Pull up parking brake lever and press down
on brake pedal for following tests.
6. Starting engine should only be possible
in "p" or ,TN",
7. Backup lights must be on in position "R".
1. Move selector lever to position "R". Engine
speed must drop as gear engages.
2. Move selector lever to position "P". Engine
speed should increase as reverse gear
disengages.
3. Repeat test in point I.
4. Move selector lever to position "N". Engine
speed should increase as reverse gear
disengages.
5. Move selector lever to position "D". Engine
speed should drop as gear engages.
Printed in Germanv VIII, 1984
Checking Adjustment of Selector Lever 37 111
Cable and Starter Locking/Backup Light Switch