Porsche 928 Workshop Manual page 173

928
Automatic Transmission/Gears, Valve Body
38
DISASSEMBLING AND ASSEMBLING CLUTCH K 2
Disassembling
1. Apply Special Tool 9315 on diaphragm
spring and tighten until snap ring can be
removed.
2. Remove diaphragm spring and springs
Note:
The quantity of springs for clutch piston will
vary. If new springs are required, the
quantity must not be changed.
2. Install seal in piston that sealing lip faces
down (direction of arrow).
3. Apply Special Tool 9317 on plate carrier.
Assembling
1. Install seal and make sure that seal does
not turn on its own.
PrinTed in Germany VIII, 1984
Disassembling and Assembling Clutch K 2
38 181