Porsche 928 Workshop Manual page 191

928
Differential/Transaxle System
39
a
DISASSEMBLING AND ASSEMBLING DIFFERENTIAL
Disassembling
1. Pull off tapered roller bearing inner race
with.a suitable puller and Special Tool
P 263.
2. Coat oval surface of differential gears with
MoS, paste.
3. Install large differential gears with press-
fit threaded plates through large opening
in differential case and hold with joint
flanges.
Assembling
1. Install ring gear on case and tighten ring
gear bolts to 150 Nm/lOB ftlb. Slide lock-
plate into groove of bolts, squeeze together
at front with a pliers (to unite lockplate
with bolt) and bend down over a hexagon
surface to lock.
a
Printed in Germany VIII, 1984
Disassembling and Assembling Differential
39-117