Removing And Installing Governor - Porsche 928 Workshop Manual

928 Automatic Transmission/Gears, Valve Body
38
REMOVING AND INSTALLING GOVERNOR
Removing
1. Loosen intermediate muffler shield and
push aside as far as possible.
2. Unlock plug for starter locking and backup
light switch by turning up white plastic
ring in direction of arrow. Pry off plug
carefully with two screw-drivers applied on
both sides.
3. Press in cover and remove snap ring with
cover.
I p;+
\. '1
4. Loosen nut for axial holder.
5. Turn axial holder counterclockwise with
a screwdriver inserted in slot (correspond-
ing with position "B" in sectional view).
1 = Cover
2 = Snap ring
3 = Governor
4 = Axial holder
5 = Axial holder nut
6 = Secondary pump
Printed in Germany VI I I, 1984
Removing and Installing Governor
38 - 143