Related Manuals for Julabo CORIO CD-B19
Summarization of Contents
2 About this Manual
2.1 Original JULABO Spare Parts
Ensuring quality and safety with genuine spare parts.
2.2 Accessories
Information on available accessories and where to find them.
2.3 Warnings
Explanation of warning signs, signal words, and severity levels.
2.4 Symbols Used
Explanation of symbols used for better comprehension.
4 Safety
4.1 Safety Instructions
General safety guidelines for operation, covering hazards and precautions.
4.2 Safety Symbols
Explanation of safety symbols displayed on the device and their meanings.
4.3 Safety Function
Description of safety functions like high temperature cut-off and low liquid level protection.
5 Product Description
5.3 Operating and Functional Elements
Identification and explanation of the device's control panel and rear connections.
5.6 Alarm Messages
Explanation of how alarms and warnings are indicated and how to resolve them.
5.8 Technical Data
General technical specifications including ambient conditions and protection class.
5.8.3 Bath Fluids
Guidelines for selecting and using bath fluids, including warnings and recommendations.
6 Transport and Installation
6.1 Transporting the Device
Instructions and safety precautions for safely transporting the circulator unit.
6.2 Install the Device at the Operating Location
Steps and considerations for properly installing the device at its designated operating location.
7 Initial Operation
7.1 Mounting the Circulator
Step-by-step guide for mounting the circulator onto a bath or cooling machine.
7.2 Connect the Device to the Power Supply
Instructions for connecting the circulator to the power supply.
7.4 Set High Temperature Safety Function
Procedure for setting the high temperature cut-off for safety.
7.5 Fill Device
Instructions on how to fill the device with the appropriate bath fluid.
8 Operation
8.1 Switch on the Unit
Steps for powering on the device and its initial startup sequence.
8.3 Configuring Setpoint Temperature
How to set and adjust the target temperature for the application.
8.4 Start Temperature Control Application
Steps to initiate a temperature control application on the unit.
8.10 Adjusting the Temperature Sensor (ATC)
Explanation of ATC and adjustment options to increase temperature control accuracy.
9 Maintenance
9.2 Check Functionality of High Temperature Cut-off
Procedure to test the proper functioning of the high temperature safety cut-off.
9.3 Test the Low Liquid Level Safety Function
Procedure to test the proper functioning of the low liquid level safety function.
9.5 Emptying
Instructions for draining the device for service, disposal, or shutdown.
9.8 Technical Service
Contact information and procedures for requesting technical service.
10 Disposal
10.1 Device Disposal
Guidelines for proper disposal of the device according to country-specific regulations.
11 Appendix
11.1 Interface Commands
Overview of commands for remote control and status querying via digital interface.
11.2 Alarms and Warnings
Description of alarms and warnings, including error codes and their causes.
11.3 Error Messages in Configuration Process
Solutions for error codes encountered during configuration or firmware updates.
Need help?
Do you have a question about the CORIO CD-B19 and is the answer not in the manual?
Questions and answers