Juniper EX3400-24P Quick Start Manual

Day One+
EX3400
IN THIS GUIDE
Step 1: Begin | 1
Step 2: Up and Running | 6
Step 3: Keep Going | 10
Step 1: Begin
IN THIS SECTION
Meet the EX3400 Ethernet Switch | 2
Install the EX3400 Switch | 2
Power On | 5
In this guide, we provide a simple, three-step path, to quickly get you up and running with your new EX3400. We've
simplified and shortened the installation and configuration steps, and included how-to videos. You'll learn how to install
an AC-powered EX3400, power it up, and configure basic settings.
NOTE: Are you interested in getting hands-on experience with the topics and operations covered in this guide?
Visit Juniper Networks Virtual Labs
sandbox in the stand alone category. EX switches are not virtualized. In the demonstration, focus on the virtual
QFX device. Both the EX and QFX switches are configured with the same Junos commands.
and reserve your free sandbox today! You'll find the Junos Day One Experience