Related Manuals for Elimko E-72
Summarization of Contents
Document Introduction
Controller Key and LED Indicator Functions
Explains the function of front panel keys and LED indicators on the controller.
Front Panel Operation and Programming
Process Screen and Operational Parameters
Details the process screen, displaying process value and control set point or manual output.
Accessing Configuration Settings
Describes the procedure to access configuration pages, including security code entry and page selection.
General Configuration (GCnF)
Covers analog input types, decimal point, linear scaling, and sensor broken behavior settings.
Control Set Point Configuration (SEEP)
Details control set point sources, limits, and ramping rate settings.
Alarm Configuration (RCnF)
Defines alarm types, set points, hystereses, and lock parameters for the device.
Output Configuration (oCnF)
Covers control types, control forms, periods, manual mode selection, and dead band settings.
PID Configuration (tünE)
Explains PID auto-tune functionality and steps for automatic tuning.
Security Configuration (PrEC)
Details security code, parameter access level, and setting level configurations.
Configuration Steps and Application Examples
Single-Output PID Control Device Configuration
Describes configuring the device for single-output PID control using specific control types.
Dual-Output PID Control Device Configuration (HEAT/COOL)
Explains configuration for dual-output PID control (Heat/Cool) with specific control types.
Open-Loop Valve Control (Floating)
Details controlling valves in floating mode without feedback using specific control types.
Feedback Valve Control (Servo System)
Describes controlling valves in servo mode using feedback input and specific control types.
Need help?
Do you have a question about the E-72 and is the answer not in the manual?
Questions and answers