Related Manuals for Elimko E-200
Summarization of Contents
1. INTRODUCTION
1.1 Front Panel Keys ve LED Indicators
Explains the function and appearance of the controller's front panel keys and LED indicators.
3. FRONT PANEL KEYS AND PROGRAMMING
3.1. Process Screen and Operation Parameters
Describes the main display screen, showing process value and control set point/manual output.
3.2. Accessing Configuration Pages
Explains how to navigate to and interact with the various configuration pages on the device.
3.3. General Configuration Page (GCnF)
Details parameters for configuring analog inputs, temperature units, and sensor behavior.
3.4. Control Set Point Configuration (SEEP)
Covers settings for controlling the set point, including source, limits, and ramping rate.
3.5. Alarm Configuration Page (RCnF)
Explains how to configure alarms, including types, set points, hysteresis, and lock settings.
3.6. Output Configuration Page (aCnF)
Details parameters for output configuration, control types, and output limits.
3.7. PID Configuration Page (tünE)
Focuses on PID control parameters, auto-tuning, and related settings for optimal process control.
3.8. Security Configuration Page (PrEC)
Covers security settings, including access levels, parameter setting levels, and factory reset options.
4. CONFIGURATION STEPS AND APPLICATIONS
Usage as a Single-Output PID Control Device
Configuration guide for using the controller as a single-output PID controller.
Usage as a Dual-Output PID Control Device (HEAT/COOL)
Configuration guide for using the controller as a dual-output HEAT/COOL controller.
Open-Loop Valve Control (Floating Control)
Details on configuring the controller for open-loop valve control without feedback.
Feedback Valve Control (Feedback in Servo System)
Explains configuration for feedback valve control using a servo system.
Need help?
Do you have a question about the E-200 and is the answer not in the manual?
Questions and answers