Intel® Server Chassis SR1475 / Intel® Server System SR1475NH1-E
Reference
Feature
A
Power /
Sleep Button
B
ID Button
C
Reset Button
D
NMI Button
4.2
Standard Control Panel LED Indicators
The standard control panel houses six LEDs, which are viewable with or without the front bezel
to display the system's operating state.
Revision 1.0
Table 16. Standard Control Panel Button Functions
Toggles the system power on/off. This button also functions as a Sleep
Button if enabled by an ACPI-compliant operating system.
Toggles the front panel ID LED and the baseboard ID LED on/off. The
baseboard ID LED is visible through the rear of the chassis and allows you
to locate the server you're working on from behind a rack of servers.
Reboots and initializes the system.
Pressing the recessed button with a paper clip or pin puts the server in a
halt state for diagnostic purposes and allows you to issue a non-maskable
interrupt. After issuing the interrupt, a memory download can be performed
to determine the cause of the problem.
Power and
NIC1 and NIC2
Sleep LED
Activity LEDs
Figure 33. Control Panel LEDs
Function
Not Used
Hard Drive
LED
Activity LED
System
Identify LED
- 45 -