Table of Contents
Advertisement
Application note – Installation and using APP
English version
Authorised electrician
Important safety instructions
Android-APP
These instructions form part of the product and must be observed. They must also be stored in a place which is always freely
accessible. The copyright for these operating instructions is held solely by KACO new energy GmbH.
iOS-APP
KACO blueplanet 3.0 NX3 M2
KACO blueplanet 5.0 NX3 M2
KACO blueplanet 8.0 NX3 M2
KACO blueplanet 10.0 NX3 M2
KACO blueplanet 15.0 NX3 M2
KACO blueplanet 20.0 NX3 M2
KACO blueplanet 25.0 NX3 M3
KACO blueplanet 30.0 NX3 M3
KACO blueplanet 33.0 NX3 M3
Advertisement
Table of Contents
Related Manuals for Kaco blueplanet 30.0 NX3 M3
Summarization of Contents
WLAN Network Configuration
App Authorization and Permissions
Granting app permissions for smartphone access to Wi-Fi stick and device functions.
Wi-Fi Stick Network Setup
Step-by-step guide to connect the Wi-Fi stick to the internet via a router.
Changing Router Connection
Procedure to reconfigure the Wi-Fi stick to connect to a different router.
Setting Wi-Fi Stick Time Zone
Configuring the correct time zone on the Wi-Fi stick for accurate data reporting.
Inverter Parameters and Data Management
Connecting to the Wi-Fi Stick
Methods to connect the smartphone to the Wi-Fi stick: direct hotspot or router.
Inverter Connection and Passcode
Steps to connect to the inverter via Wi-Fi stick and verify access using a passcode.
Enabling Inverter Functions
Activating and configuring essential functions for inverter operation via the app.
Grid Standards Configuration
Selecting and applying correct national grid code standards for compliance.
Inverter Power-Up Settings
Configuring voltage and frequency parameters for safe inverter startup.
Voltage Protection Settings
Setting voltage thresholds and trip times for over/under-voltage protection.
Frequency Protection Settings
Setting frequency thresholds and trip times for over/under-frequency protection.
Reconnection Time Configuration
Defining the observation period for grid parameters before inverter reconnection.
Active Power Limit Settings
Managing active power output and ramp rates according to grid requirements.
Over-Frequency Power Response
Configuring active power adjustment based on frequency deviations and control modes.
Over-Voltage Power Response
Configuring active power adjustment based on voltage deviations and control modes.
Reactive Power Running Modes
Selecting reactive power control modes for grid voltage support.
Fixed Power Factor Setting
Setting a constant displacement factor (cos φ) for reactive power output.
Cos(Φ) vs. Power Curve
Defining reactive power output based on active power levels using a curve.
Fixed Reactive Power (Q) Setting
Setting a constant reactive power output (Q) as a percentage of nominal power.
Reactive Power vs. Voltage Curve
Defining reactive power output based on voltage levels using a curve.
Inverter Parameter Reporting
Exporting detailed inverter operating parameters and configuration settings.
Real-Time Inverter Data Connection
Establishing a connection to the inverter to retrieve live operational data.
Inverter Real-Time Details
Viewing live performance metrics and status information from the inverter.
Firmware Update Procedures
Wi-Fi Stick Firmware Update
Guide to updating the Wi-Fi stick firmware using the KACO-NX1 APP.
Inverter Firmware Update
Guide to updating the inverter unit firmware using the KACO-NX1 APP.
Need help?
Do you have a question about the blueplanet 30.0 NX3 M3 and is the answer not in the manual?
Questions and answers