Input Label - Zenith 32LC2DA Installation And Operating Manual

Operation
° Sets a label to each input source
or lets you skip the input source
which is not in use when you
press INPUT button.
1
Press the MENU button and then use A / T button to select the _ menu.
2 Press the 1_ button and then use A / V button to select Input Label,
3 Press the I_ button and then use A / V button to select the source: AV1-
2, Component1-2, RGB-PC or HDMIiDVl.
4 Press the 41 / I_ button to select the label
5 Press EXIT button to return to TV viewing or press MENU button to
return to the previous menu.
32