Manual Scan - Zenith 32LC2DA Installation And Operating Manual

Operatio_
Setup Menu Options
- Automatically finds aft channels
available through antenna or
cable inputs; and steres them in
memory on the channel list.
Run EZ Scan again after any
Antenr_:_Cable_r_,en c_&
A password is required to gain
access to EZ Scan menu if the
Lock System is turned on.
1
2
3
Press the MENU button and then use ,L / V button to sel_ the _ menu.
Press the I_ button and then use A / V button to select ET. Scan,
Press the ENTER button to begin the channet search
Allow EZ Scan to complete the channet search cycle for ANTENNA, and
CABLE.
A password is required to gain
access to Manual Scan menu if
the L_ System is turned on.
1 Press the MENU button and then use A / V button to sel_ the _ menu,
2 Press the I_ button and then use A / Y button to select Nl_emua! 8¢_,
3 Press the P button and then use A / Y button to select TV, DTV, C_ZV,
and CADTV.
4 Press the I_ button and then use A / V button to select channel num-
ber you want to add or detete.
5 Press the ENTER button to add or delete for the channel number.
6 Press EXIT button to return to TV viewing or press MENU button to
return to the previous menu,
29