Zenith L26W56S Installation And Operating Manual
  1. Manuals
  2. Brands
  3. Zenith Manuals
  4. LCD TV
  5. L26W56S
  6. Installation and operating manual

Zenith L26W56S Installation And Operating Manual

Lcd tv/monitors
Hide thumbs
Table of Contents

Advertisement

Quick Links

Installation and Operating Guide | Warranty
Model Numbers | L26W56S • L26W56B • L26W56W | LCD TV/Monitors
© Copyright 2006, LG Electronics U.S.A., Inc.
t a b l e o f c o n t e n t s
Zenith and the lightning Z logo are registered
trademarks of Zenith Electronics Corporation
5
page

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the L26W56S and is the answer not in the manual?

Questions and answers

Related Manuals for Zenith L26W56S

Summary of Contents for Zenith L26W56S

  • Page 1 Installation and Operating Guide | Warranty Model Numbers | L26W56S • L26W56B • L26W56W | LCD TV/Monitors t a b l e o f c o n t e n t s page Zenith and the lightning Z logo are registered trademarks of Zenith Electronics Corporation ©...

  • Page 2: Safety Warnings

    •Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. •Consult the dealer or an experienced radio/TV technician for help. Marketed and Distributed in the United States by LG Electronics U.S.A., Inc. 2000 Millbrook Drive, Lincolnshire, IL 60069.
  • Page 3 Do not attempt to modify this product in any way without written authorization from Zenith Electronics Corporation. Unauthorized modification could void the user’s authority to operate this product. COMPLIANCE: The responsible party for this product’s compliance is: LG Electronics U.S.A., Inc., 2000 Millbrook Drive Lincolnshire, IL 60069, USA. Phone: 1-847-941-8000...

  • Page 4: Important Safety Instructions

    IMPORTANT SAFETY INSTRUCTIONS 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this apparatus near water. 6. Clean only with dry cloth. 7. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. 8.

  • Page 5: Table Of Contents

    Table of Contents The table of contents lists the pages to go to for setting up the features for the end user. Safety Warnings ......2-3 Step 2.

  • Page 6: Setup Checklist

    Setup Checklist Installation Overview LT2002 Quickset II Clone Programmer Master TV Features Setup for Cloning To copy the TV's setup, the installer will Overview • Unpack the LCD TV/Monitor and all need a clone programmer. Is there a accessories. • Set up Installer's remote control, see Zenith LT2002 Clone Programmer page 20.

  • Page 7: Installation/Connections Overview

    Installation/Connections Overview To hook up source equipment, see below and also refer to the Table of Contents on page 5; shows pages to go to for equipment hookup options. AUDIO/ VIDEO 2 (SIDE AUTO- CAMPORT) AUDIO / VIDEO 1, 3 IN Connect Audio / Video equipment to these jacks.

  • Page 8: Vesa Standard Tv Mounts

    VESA Standard TV Mounts There are several Vesa standard mounts available that can be used with this TV. The mount shown to the right would be installed on the TV back using required bolts in the four pre-threaded holes provided. Follow any instructions supplied with the Vesa mount if one is to be used for the TV installation.

  • Page 9: Antenna

    Antenna Hookup Connect an off-air antenna to the LCD TV/Monitor. Locate the Antenna/Cable jack on the back of the LCD TV/Monitor. Connect the antenna wire (Flat or Round) that runs from the wall to this jack, according to one of the diagrams shown to the right.

  • Page 10: Cable Service

    Cable Service Hookup Connect cable service to the LCD TV/Monitor. Locate the Antenna/Cable jack on the back of the TV. Connect the cable wire to the Cable TV Antenna/Cable jack according to one Wall Jack COMPONENT(DVD/DTV)1 AUDIO IN VIDEO IN of the diagrams to the right.

  • Page 11: Antenna & Vcr

    Antenna & VCR Hookup Connect antenna and a VCR to the LCD TV/Monitor. Locate the Antenna/Cable jack on the back of the VCR. Connect the antenna wire that runs from the wall jack to the VCR. Connect other wires according to the diagram to the right.

  • Page 12: Cable Service With Vcr

    Cable Service with VCR Hookup Connect cable service and a VCR to the LCD TV/Monitor. Locate the Antenna/Cable jack on the back of the VCR. Connect the cable service wire to the VCR. Connect other wires according to the diagram to the right. After all connections are complete, plug in the TV.

  • Page 13: Component Video (Dvd)

    S-Video Hookup (DVD-VCR) Locate the S-Video out port on the DVD or VCR. Connect an S-Video cable between the DVD player and S-Video In on the TV. Make R - L Audio connections as indicated VIDEO 1 AUDIO IN VIDEO IN to the right.

  • Page 14: Dvi Hookup To Rjp100 Or Dvd Player

    DVI Hookup To RJP100 or DVD Player Locate the DVI out port on the RJP100M or DVI device. Connect a DVI cable between the RJP100M and DVI in port on the TV. If required, make Audio connections as indicated to DVI/PC AUDIO HDMI/DVI the right.

  • Page 15: Ac Power Cord Connection

    AC Power Cord Connection Connect the AC power cord directly to the LCD TV/Monitor. AC Power Cord Hookup The LCD TV/Monitor is designed to operate on 120V AC power. Locate the AC Power Cord input socket on the back of the LCD TV/Monitor. Insert the AC power cord connector into the AC Socket on the TV as shown below.

  • Page 16: Front Panel Controls

    Front Panel Controls Using the front control panel to operate the LCD TV/Monitor. Power / Standby Indicator Glows red in Standby mode. Glows green when the TV is turned on. Glows orange in Sleep Timer and/or Alarm mode. Remote Control Sensor TV Operation Press the POWER button to turn the LCD TV/Monitor on from standby mode.

  • Page 17: On-Screen Menus Overview

    On-Screen Menus Overview Descriptions of the menus and on-screen displays. Menu Name Page Description ON-SCREEN MENUS CHANNEL MENU Adjusts the basic operational features of the TV. Auto Program Automatically finds and stores active channels to scroll through using Channel Up/Down. Channel List Manually picks and chooses which active channels will appear when using Channel Up/Down Channel Label...

  • Page 18: Other Menus And On-Screen Displays

    Other Menus & On-Screen Displays Use the remote keys indicated below to access these menus and displays. In this manual, the OSD (On Screen Displays shown) may be different than those on the actual TV. The following are generic examples to familiarize you with the TVs options. TIMER English Volume Display...

  • Page 19: User Remote Control Key Functions

    User Remote Control Key Functions A list of the keys and their functions on the user remote control supplied with the LCD TV/Monitor. MUTE Turns sound Off and On, while the picture remains. MUTE POWER POWER TV/AV Turns TV On or Off. TV/AV PREVIEW GUIDE Displays a menu of all available input...

  • Page 20: Installer Remote Key Functions

    Installer Remote Key Functions A brief list of the keys on the optional installer’s remote and what they do. CC (Closed Captioning) Press to access closed captions. FLASHBK (Flashback) Returns to the previous channel viewed. POWER Turns TV On or Off. MUTE Turns sound Off and On, while the picture TV/FM...

  • Page 21: Auto Program (Do A Channel Search)

    Auto Program (Channel Search) Use Auto Program to automatically find and store all of the channels available in the selected Tuning Band. Notes: Tuning Band must be set before doing the channel search. See Installer menu item 003 Band/AFC. Default setting is 1, for CATV.

  • Page 22: Channel List

    Channel List After the channel search, remove unwanted channels. Removing unwanted channels Review the channels found, you may remove unwanted channels. Antenna Auto Program Channel Label Press the MENU button and then use SELECT button to Channel Channel List access the Channel menu. Fine Tune Signal Strength Press the ENTER button.

  • Page 23: Channel Labels Setup

    Channel Labels Setup Note: If you add channel labels to existing channels, then re-run Auto Program, the labels will all be deleted. Antenna Channel Labels Setup Auto Program Channel Label Channel Channel Labels help the user identify the channel or network being viewed. Channel List In the Setup menu with the Channel Labels option highlighted, use the ADJ Fine Tune...

  • Page 24: Clock Setup

    Clock Setup Manual Time Settings Time - Use the SELECT and ADJ F F / G G buttons to set the year, month, V-Chip day, hours and minutes. Setup Menu Language English Press the MENU button and then use SELECT button to Menu Transparency Transparent highlight the Setup menu.
  • Page 25 Clock Setup (Continued) Automatic Time Settings - If you select auto time setting, time will be set from the digital Time broadcast information. V-Chip Press MENU and use SELECT button to select the Setup Setup Menu Language English menu. Menu Transparency Transparent Set ID Press the ENTER button.
  • Page 26 Clock Setup (Continued) Daylight Saving Time Installer can elect to use Daylight Savings to adjust the clock time. V-Chip This is operated from the Automatic Time Settings. Setup Menu Language English Menu Transparency Transparent Press the MENU button and then use SELECT button to Set ID select the Setup menu.

  • Page 27: Menu Language

    Menu Language Choose a language for the on-screen menus. Time V-Chip Press the MENU button and then use SELECT button to display the Setup menu. Setup Menu Language English Menu Transparency Transparent Press the ENTER button. Set ID 11:20 PM Use SELECT button to highlight Menu Language, then Sep.11, 2006 press the ENTER button.

  • Page 28: V-Chip

    V-Chip Entering a PIN -This option sets up or changes the password for blocking program ratings. Time V-Chip Press the MENU button and then use SELECT button to Setup access the Setup menu. Menu Language English Menu Transparency Transparent Press the ENTER button. Set ID 11:20 PM Use the SELECT button to highlight V-Chip, then press...
  • Page 29 V-Chip (Continued) TVPG Ratings -You can block programs based on the TV program rating. Time V-Chip Press the MENU button and then use SELECT button to Setup access the Setup menu. Menu Language English Menu Transparency Transparent Press the ENTER button. Set ID 11:20 PM Use the SELECT button to highlight V-Chip, then press...
  • Page 30 V-Chip (Continued) MPAA Ratings -Restricting movies by their rating. Time V-Chip Press the MENU button and then use SELECT button to Setup access the Setup menu. Menu Language English Menu Transparency Transparent Press the ENTER button. Set ID 11:20 PM Use the SELECT button to highlight V-Chip, then press Sep.11, 2006 the ENTER button.

  • Page 31: V-Chip

    V-Chip (Continued) Canadian English Ratings Press the MENU button and then use SELECT button to access the Setup menu. Time V-Chip Press the ENTER button. Setup Menu Language English Use the SELECT button to highlight V-Chip, then press Menu Transparency Transparent the ENTER button.

  • Page 32: Caption Menu

    Caption Menu Turn Captions On/Off On/Off Analog Mode Digital Mode Service1 Caption Press the MENU button and then use SELECT button to Digital Font Option select the Caption menu. Press the ENTER button. 11:20 PM Sep.11, 2006 Use the SELECT button to highlight On / Off, then press the ENTER button.
  • Page 33 Caption Menu (Continued) Digital Mode On/Off Analog Mode Digital Mode Caption - Digital Captions only appear on digital channels. Digital Font Option Press the MENU button and then use SELECT button to access the Caption menu. 11:20 PM Sep.11, 2006 Press the ENTER button.

  • Page 34: Sound Menu

    Sound Menu Set up the audio options for the end user Sound Mode Setup - Match the sound mode to the program character, Music, Movie, Sports, or News. Press the MENU button and then use SELECT button to Mode Standard access the Sound menu.
  • Page 35 Sound Menu (Continued) Automatic Volume Control Settings - Have the TV automatically maintain the sound level between different channels. Press the MENU button and then use SELECT button to access the Sound menu. Mode Standard Balance Digital Output Press the ENTER button. Sound Auto Volume Multi-Track...

  • Page 36: Picture Menu

    Picture Menu Picture Mode Setup - Set the picture mode to the program content, e.g. Dynamic or Mild etc. Press the MENU button and then use SELECT button to access the Picture menu. Mode Color Temperature Normal Screen Format 16:9 Picture Press the ENTER button.
  • Page 37 Picture Menu (Continued) Color Temperature Settings Press the MENU button and then use SELECT button to access the Picture menu. Mode Color Temperature Normal Screen Format 16:9 Press the ENTER button. Picture Noise Reduction Film Mode Use the SELECT button to highlight Color Temperature, then press the ENTER button.

  • Page 38: Installer Overview

    Installer Overview Following is the Commercial Mode Operation Setup. L26W56X PTC INSTALLER MENU Operating Installer Menu To set up the controls for the TV you will need to know how to enter INSTALLER SEQ the L26W56X Installer menu and make changes to the default values as required.

  • Page 39: Commercial Mode Setup

    Commercial Mode Setup This page provides an overview of the TV configuration. See the pages listed below for more specific, detailed instructions at each step; how to access and use the Installer menu etc. Note 1: Disconnect all Aux inputs. Under certain conditions, Auto Program (Channel search) is disabled if there is an Aux input active.
  • Page 40 Cloning Connections/Learning Setup Connections for the LT2002 Clone Programmer to Learn the L26W56X Master TV Setup. Antenna or CATV Ferrite Core (TDK, ZCAT 2035-0930) THE CLONE HAS CONTROL OF THE TV THE CLONE IS VERSION THE TV IS VERSION THE SW IS REVISION ¤...
  • Page 41 POWER, OR ENTER Since the Clone Programmer’s time cannot be set directly, the current time needs to be copied from a Zenith/LG TV equipped with M.P.I. input capability. After the time is copied to the Clone programmer, the current time can then be transferred to another TV.
  • Page 42 Cloning Connections / Teaching Setup Teaching the Master Setup to Another L26W56X Connections for the LT2002 to Teach another L26W56X the Master Setup Antenna Ferrite Core or CATV (TDK, ZCAT 2035-0930) THE CLONE HAS CONTROL OF THE TV THE CLONE IS VERSION THE TV IS VERSION THE SW IS REVISION ¤...

  • Page 43: Installer Menu

    Installer Menu Use the Installer’s Menu to set up or change operational settings. See more detailed descriptions of the Installer menu items on the following pages... Accessing the Installer’s Menu Make sure TV is on. Installer’s menu items can be accessed by using an installer’s remote L26W56X PTC INSTALLER MENU control.
  • Page 44 Installer Menu Installer Menu Items 035 through 117 Menu Item Function Value Range Default Value Brief Description of Function and Comments COMPPORT EN. 0 / 1 Set to 1 to enable HDMI. Set to 0 to disable. YPrPb EN. 0 / 1 Set to 1 to enable display panel Component 1 input jacks.
  • Page 45 Installer Menu Detailed Descriptions of Installer Menu Items 005 - CHAN LOCK (Channel Lock) CHAN LOCK is ideal if the system must always be on the same channel. Changing channels with Channel Up/Down or keypad 000 - INSTALLER SEQUENCE numbers is impossible. Channel Lock is inactive if set to 0 (default). Specifies entry sequence to the Installer Menu.
  • Page 46 Installer Menu (Continued from previous page) The value range is 0 to 63, with 63 as the default, which gives the 030 - ACK MASK user the full range of volume control, if item 008 MIN VOLUME is M.P.I. Communication Parameter. Leave at default setting unless also set at 0.
  • Page 47 Installer Menu Detailed Descriptions of Installer Menu Items 053 - DIS. CH-TIME (Disable Channel-Time) 082 - CHKSM ERROR (Checksum Error) Set to 1 to disable the Channel-Time display, Channel-Time display Enforces rigid M.P.I. checksum validation. will not appear. Set to 1 for validation. Set to 0 to enable the Channel-Time display.
  • Page 48 Installer Menu (Continued from previous page) 094 - SAP MENU EN (2nd Audio Program) 102 - ATSC BAND Set to 1 to enable SAP feature, if available. Sets up TV to receive different types of incoming signals: Set to 0 to disable SAP feature. 0=Broadcast, 1=CATV, 2=HRC, 3=IRC, 4=Same as NTSC.

  • Page 49: Reference

    Reference: TV Features / Menus that can be Cloned Clonable Menu Features Channel Picture Sound Setup Caption Auto Program (Active Mode Mode Time On/Off channels found with Contrast Treble Clock Analog Mode the channel search) Brightness Bass Auto Off Digital Mode Channel Labels Color Balance...
  • Page 50 Reference: Procedures for adding Channel Label Icons/Custom Channel Labels (2-5-4 + MENU Mode) Adding Channel Icons and Labels in the 2-5-4 + Menu Mode Editing/Adding Channel ICONs and/or Labels Editing and adding the labels can only be done if there are If there is no pre-assigned ICON, you can make a channel label of up channels entered into the L26W56X’s channel map either by to 7 characters to help in identifying the channel or network.
  • Page 51 Reference: Detailed Information For Making A Master TV IMPORTANT INSTALLER SETUP INFORMATION! PLEASE READ THE FOLLOWING... To set up a master TV you will need to know how to adding channel icons or channel labels are not correctly added, then enter the L26W56X Installer menu and make changes to the cloned L26W56Xs TVs will all have problems.
  • Page 52 Reference: Software Updating Procedure Procedure to Check Software Version The software version of the L26W56X may be checked by accessing the INSTALLER MENU. To do this, press the MENU button at least 10 times until the menu display ceases to respond to MENU key presses. Then, press "9", "8", "7", "6", "ENTER/SELECT".
  • Page 53 L26W56X Camport Auto Sense Operation The CAMPORT Auto Sense function is enabled when: CAMPORT (Front Video) Functionality Control 1. Installer Menu Item 34, CAMPORT EN is set to 1 AND Item 34 Item 40 Front Video 2. Installer Menu Item 40, AUTO CAMPORT is enabled (1). CAMPORT EN AUTO CAMPORT Operation...

  • Page 54: Troubleshooting

    L26W56X Aux Input Configuration / Troubleshooting L26W56X Aux Input Configuration ENABLE MPI DATA MPI DATA DATA STATUS DATA DIRECT ACCESS STATUS L26W56X STATUS TYPE TYPE 0xD2 STATUS Tuning Installer Menu 0x41 SOURCES CURRENT AV TYPE 0X0D SOURCE ENABLED (R/W) SOURCE (R) ASSIGNMENT SOURCE OLD_OCV...
  • Page 55 -Check that “+” and “-” match in battery compartment. • Too much light in room. -Dim room light. • Wrong Installer remote control. -Requires compatible Installer remote, contact your LG dealer. Picture Reception Normal picture, poor • Audio muted. -Press MUTE or use Volume Up key to increase sound level.
  • Page 56 Reference: Cloning Procedure Troubleshooting Warning: Do not use LT2002 while a LodgeNet PPV card is installed in TV or clone programmer will be damaged. Note The LT2002 programmer is designed to be used with TVs con- Reset Clone After Static Shock taining the 221-01006 and later processors.

  • Page 57: Troubleshooting Flow Chart

    Troubleshooting Flow Chart Controller Quick Check POWER Plug Press ’POWER’ or ’ON/OFF’ LED on Connected to into AC key on TV DTV Board AC Power Power Outlet Blinking TV Turn 1. Bad TV Press ’POWER’ or ’ON/OFF’ or ’VOLUME UP/DOWN’ or ’MUTE’...

  • Page 58: Commercial Mode Check

    Commercial Mode Check Press the "On/Off" key on the front panel. The On/Off key is always operational. you get Bad TV a response Leave TV set On Go to Installer menu by pressing "MENU" until the TV stops responding. TV stop TV is in responding Stopped...

  • Page 59: Glossary Of Terms

    Glossary of Terms A list of definitions for some of the words found in this guide 75 OHM RF CABLE DIGITAL TELEVISION OUTPUT The wire that comes from an off-air antenna or High-resolution, cinema-quality television Refers to the output jack that sends a signal cable service provider.

  • Page 60: Warranty

    LCD TV/Monitor Welcome to the LG family! We believe that you will be pleased with your LCD TV/Monitor. Please read this warranty carefully, it is a “LIMITED WARRANTY” as defined under Federal Law. This warranty gives you specific legal rights, and you may also have other rights that vary from state-to-state within the U.S.A.

This manual is also suitable for:

L26w56bL26w56w

Table of Contents