CAUTION: Do not attempt to modify this product in any way without written authorization from Zenith Electronics Corporation. Unauthorized modification could void the user’s authority to operate this product. COMPLIANCE: The responsible party for this product’s compliance is:...
Safety Instructions Safety Instructions Safety Instructions Important safeguards for you and your new product Your product has been manufactured and tested with your safety in mind. However, improper use can result in potential elec- trical shock or fire hazards. To avoid defeating the safeguards that have been built into your new product, please read and observe the following safety points when installing and using your new product, and save them for future reference.
Page 4
Safety Instructions Safety Instructions continued Safety Instructions continued 14. Outdoor Antenna Grounding 19. Servicing If an outside antenna or cable system is connected to the Do not attempt to service this product yourself as opening or product, be sure the antenna or cable system is grounded so removing covers may expose you to dangerous voltage or as to provide some protection against voltage surges and other hazards.
Introduction Introduction Introduction Controls Controls Front Panel Controls Front Panel Controls MENU Button VOLUME Button TV/VIDEO Button CHANNEL Button ENTER Button ON/OFF Button on/off tv/video menu enter MONO STEREO Mono Indicator SAP Indicator DPM Indicator Stereo Indicator Power/Standby Indicator llustrates Red in Stadnby mode, Illustrates green when the TV is turnd on.
Page 7
Introduction Connection Options Connection Options Connection Panel Connection Panel Headphone Jack S-Video Input Video Input Audio Input DC IN (15V) PC INPUT ANT IN VIDEO (MONO) AUDIO +75 Ω SOUND COMPONENT(480i/480p/720p/1080i) AUDIO VIDEO IN DVD/DTV IN Antenna Input DC 15V Input Audio / Vdieo Input PC Input...
Introduction Remote Control Key Functions Remote Control Key Functions - When using the remote control, aim it at the remote control sensor on the monitor. MUTE MULTIMEDIA Switches the sound on or off. Selects: Component , or RGB-PC mode. TV/VIDEO mute power Selects:...
Installation Installation Installation Accessories Accessories mute power tv/video multimedia mts exit menu enter audio video flashbk sleep position pip input 1.5V Operating Guide AAA Batteries AC Adapter Remote Control PC Sound Cable PC Signal Cable Power Cord Tie Bands - Arrange the wires with the tie bands.
Installation Installation Instructions continued Installation Instructions continued Rear Rear A/V Cover A/V Cover ire Holders ire Holders * The connection panel is hidden behind the A/V cover. - Thread, then pull the wires through the hole on the TV a. Remove the cover. stand.
Installation External Equipment Connections External Equipment Connections Antenna Connection Antenna Connection - For optimum picture quality, adjust antenna direction. Connecting to an Inside Antenna Setup - Typical wall antenna jack used in apartment buildings, connect the antenna cable as shown below. (Use the correct type of antenna cable for the type of wall antenna jack.) Turn clockwise to tighten.
Installation External Equipment Connections Continued External Equipment Connections Continued VCR Setup VCR Setup - In Video mode, TV automatically reverts to TV mode if the fcr button or flashbk buttons are pressed. Connection 1 DC IN (15V) PC INPUT ANT IN VIDEO (MONO) AUDIO...
Installation DVD Setup DVD Setup Connections Connect the DVD video outputs to the COMPONENT (Y, P ) jacks and connect the DVD audio outputs to the AUDIO jacks. DC IN (15V) PC INPUT ANT IN VIDEO (MONO) AUDIO SOUND +75 Ω Viewing Setup COMPONENT(480i/480p/720p/1080i) AUDIO...
Installation PC Setup PC Setup - After setup, be sure to set TV to select RGB-PC source on TV. Connections 1. Set the monitor output resolution on the PC before connecting to the TV. 2. Connect the TV to the PC with the PC cable. PC INPUT ANT IN VIDEO...
Operation Operation Operation TV Operation Overview TV Operation Overview 1. First, make all equipment connections. Plug the AC Adapter into the TV, then plug the AC Adapter into a power outlet. Press located on the TV. on/off • Press power on the remote control to put the TV into standby mode.
Operation Station Menu Options Station Menu Options Memorizing the Channels with EZ Scan Memorizing the Channels with EZ Scan - For EZ scan to work, the programming source must be connected to the TV and the TV must be receiving programming signals either over-the-air or from a cable-type service provider.
Operation Picture Menu Options Picture Menu Options EZ V ideo EZ V ideo - This function adjusts the TV for the best picture appearance. - When adjusting picture options (contrast, brightness, color, sharpness and tint) manually, EZ Video automati- cally changes to User 1.
Operation Picture Menu Options Continued Picture Menu Options Continued Manual Color emperature Control ( User option) Manual Color emperature Control ( option) - You can adjust red, green, or blue to any color temperature you prefer. 1. Press the menu button and then use button to select the Picture D / E...
Operation Sound Menu Options Sound Menu Options Audio Audio - This function lets you enjoy the best sound without any special adjustment because the TV has the appropriate sound option based on the program content. - When adjusting sound options (treble, bass, and balance) manually, EZ Audio automatically changes to User 1.
Operation Sound Menu Options Continued Sound Menu Options Continued Sound selection in PC mode Sound selection in PC mode - Be sure to select the RGB-PC source before operation and turn on the PIP. Press the menu button and then use D / E button to select the Sound...
Operation ime Menu Options ime Menu Options Setting the Auto Clock Setting the Auto Clock - The time is set automatically through from a PBS broadcast signal. - The PBS channel signal includes information for the correct time and daylight saving time. 1.
Operation ime Menu Options Continued ime Menu Options Continued Setting the On/Of imer Setting the On/Of imer - Timer function operates only if current time has been already set. - Off-Timer function overrides On-Timer function if they are set to the same time. - The TV must be in standby mode for the On Timer to work.
Operation Special Menu Options Special Menu Options Closed Captions Closed Captions Closed captioning is a process which converts the audio portion of a television program into written words which then appear as sub- titles on the television screen. Closed captions allow viewers to read the dialogue and narration of television programs. Using Closed Captions Captions are the subtitles of the dialogue and narration of television programs.
Operation Special Menu Options Continued Special Menu Options Continued Captions Captions 1. Use the cc button repeatedly to select Captions. EZ mute • You can also adjust in the menu. Caption Special • shows the selected captions option (if available on program) when the TV sound is muted. Ez mute Caption/T Caption/T...
Operation Lock Menu Options Lock Menu Options Parental Control can be used to block specific channels, ratings and other viewing sources. The password will be required to gain access to Parental Control if the Lock System is turned on. The Parental Control Function (V-Chip) is used to block program viewing bassed on the ratings sent by the broadcast station. The default setting is to allow all programs to be viewed.
Operation Lock Menu Options Continued Lock Menu Options Continued Lock setup Lock setup 1. Press the menu button and then use D / E button to select the Lock menu. Lock • If Lock is already set then enter the password then requested. Lock on/off Set Passward •...
Operation RGB-PC Menu Options RGB-PC Menu Options - Be sure to select the RGB-PC source before operation. Adjusting Horizontal/ V ertical Position Adjusting Horizontal/ V ertical Position 1. Press the menu button and then use button to select the RGB-PC Menu RGB-PC Menu D / E H-Position...
Operation (Picture-In-Picture) Feature (Picture-In-Picture) Feature - PIP lets you view 2 different inputs pictures (sources) on your TV screen at the same time. One source will be large, and the other source will show a smaller inset image. - Double Window splits the screen into 2, allowing 2 picture sources to be shown on the TV screen at the same time. Each source is given half the screen.
Operation Moving the PIP Moving the PIP Size Size F / G Press the size button and then use button to change Press the position button in PIP mode. the sub picture size. D / E / F / G Press the button repeatedly until desired position is achieved.
Troubleshooting Checklist roubleshooting Checklist roubleshooting Checklist SYMPTOMS No power No picture or sound Poor picture but good sound Poor reception Lines in picture Ghosts (multiple images) Remote control does not work. Cannot tune desired channel. CHECK THESE THINGS Is power cord plugged in ? Is television turned on ? Check batteries in remote control.
If you leave your Monitor dormant for a long time (such as a vacation), it’s a good idea to unplug the power cord to protect against possible damage from lightning or power surges. Product Specifications Product Specifications MODEL L17W36 Width (inches) 13.6 Height (inches) 14.4...
Page 32
ZENITH ELECTRONICS CORPORATION LCD-TV L17W36 LIMITED WARRANTY – USA Zenith will repair or replace your product, at Zenith’s option, if it proves to be defective in material or workmanship under normal use, during the warranty period (“Warranty Period”) listed below, effective from the date (“Date of Purchase”) of original purchase of the product.