Related Manuals for Gossen MetraWatt ENERGYMID EM2289
Summarization of Contents
Applications
Intended Use / Use for Intended Purpose
Defines the authorized applications and purpose of the energy meter.
Use for Other than Intended Purpose
Specifies actions considered contrary to the instrument's intended use.
Liability and Guarantee
Outlines warranty conditions and manufacturer liability for product use.
Documentation
Information Concerning These Instructions
Explains how to read and interpret the operating instructions for safety.
Identification of Warnings
Explains hazard symbols and their severity levels used in the manual.
Identifiers
Lists symbols and terms used throughout the documentation for clarity.
Definition of Terms
Provides definitions for key terms and abbreviations used in the manual.
The Instrument
Scope of Delivery
Lists the items included in the package with the energy meter.
Optional Accessories
Details available accessories that can be purchased separately for the instrument.
Instrument Overview
Details the physical layout and identifying marks of the energy meter.
Dimensional Drawing
Provides the physical dimensions of the energy meter for mounting purposes.
Tamper-Proof Sealing
Explains the security features and seals used to prevent unauthorized access.
Connections
Details the terminal layout and connection points for wiring the energy meter.
Symbols on the Instrument and the Included Accessories
Explains the meaning of various symbols found on the device and its accessories.
Relevant Standards, Regulations and Directives
Lists the standards and regulations the instrument complies with.
Technical Data
Specifies the technical parameters, operating conditions, and performance characteristics of the meter.
Characteristic Values
Details the measurement ranges, accuracy, and input/output specifications of the meter.
Bus Interfaces
Details the available bus connection options like LON, M-Bus, and Modbus.
Block Diagram for Safety Specification
Presents a safety-related block diagram of the instrument's internal components.
OBIS Figures
Lists OBIS figures (object identification system) for measured quantities as per EN 62056-61.
Initial Startup
Unpacking
Instructions for checking the delivery scope and inspecting the instrument for transport damage.
Installation
Step-by-step process for physically installing the energy meter.
Connection to Your Equipment (interfaces)
How to connect the instrument to external systems via various interfaces.
Configuration and Operation
Display (viewing values)
Describes how to view various measured quantities on the instrument's display.
Settings
Lists the parameters that can be adjusted on the energy meter.
Display of Active and Reactive Energy, as well as Active and Reactive Power
Guides on how to display energy and power measurements in different modes.
Switching Amongst Tariffs
Instructions on how to switch between different tariff settings on the meter.
Power Displays (FEATURE M1/M3 ONLY)
Displays power-related information for models with M1/M3 features.
Mains Monitor (ONLY WITH FEATURE M1/M3)
Monitors mains voltage, current, and frequency for M1/M3 features.
SO Pulse Output (ONLY WITH FEATURE W0)
Configuration and display of the SO pulse output feature.
Transformation Ratio (EM2381, EM2387 AND EM2389 ONLY)
Viewing and setting CT/VT ratios for transformer-connected meters.
Bus Connections (FEATURES W1, W2,W4, W7)
Information on connecting and using various bus interfaces.
Meter Reading Profile
Details on meter reading profiles for data logging and billing.
Firmware Version
How to display the current firmware version of the instrument.
Display Test
Procedure to test the functionality of the instrument's display segments.
Calibration Display
How to activate and use the calibration display for precise readings.
Error
Power Failure
Details how meter parameters and readings are retained during power failures.
Fault Conditions and Troubleshooting
Identifies error codes and provides solutions for fault conditions.
Maintenance
Cleaning
Guidelines for cleaning the exterior surfaces of the instrument.
Recalibration
Information on the calibration period and procedure, including regulations.
Repairs
How to get the instrument repaired and information on warranty claims.
Removal from Service and Dismantling
Disconnection from the Power Supply
Steps to safely disconnect the energy meter from the electrical power supply.
Dismantling
Instructions for physically removing the instrument from its installation site.
Certifications
CE Declaration
Confirmation that the instrument meets EU directives and national regulations.
Calibration Certificate (WITH FEATURE P9 ONLY)
Notes that a calibration certificate is included with specific instrument features.
Prototype Test Certificate
Information on where to find prototype test certificates for the instrument.
National Declaration of Conformity
Confirmation of compliance with German measurement and calibration acts.
Need help?
Do you have a question about the ENERGYMID EM2289 and is the answer not in the manual?
Questions and answers