Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for Fisher & Paykel DS601
Summarization of Contents
Service Requirements and Safety
Health and Safety Precautions
Covers essential safety practices including electrical safety, static discharge, and good working habits.
Specialized Tools for Service
Lists and describes specialized tools required for servicing the DishDrawer, including part numbers.
Technical Overview of DishDrawer
Electronics Overview
Details the electronic controller, microcontrollers, user interface, and peripheral power supply for the DishDrawer.
Motor Specifications and Operation
Describes the motor specifications, including type, power, and operating speeds for different wash cycles.
Cabinet Construction and Assembly
Explains the chassis construction, drawer fronts, and cabinet assembly, emphasizing load-carrying structure.
Water Filling Process
Details the cold water inlet process, including the dual water valve, fill hose, and detergent dispenser interaction.
Detergent Dispensing Mechanism
Explains the detergent dispenser mechanism, its chambers, and the rinse aid delivery system with indicator.
Lid Seal Functionality
Describes the lid seal's function, inflation mechanism via air pump, and its role in creating a dynamic seal during washing.
Wash Cycle Operation
Covers the tub, rotor assembly, and spray arm, detailing water flow and jet placement for efficient washing.
Heating System Details
Details the heater plate, heating process, temperature maintenance, and overheating control mechanisms.
Filter Plate and System
Explains the filter system, including the drain filter and the process for removing and cleaning the filter plate.
Drain Cycle Operation
Describes the drain pump, its centrifugal action, housing, and the routing of the drain hose.
Drying Cycle Process
Details the drying system operation, fan usage for air circulation, and the process for maintaining electronics temperature.
Lid Seal Deflating Mechanism
Explains the deflating process of the lid seal, involving an exhaust valve releasing air pressure.
Lockring Nut Functionality
Describes the lockring nut's function in sealing the heater plate and motor, and its role in securing hoses and wiring.
Wiring Cover Purpose
Details the wiring cover's protective function for mains supply, motor assembly, and hoses, acting as a cosmetic part.
Diagnostics and Fault Finding
Setup and Diagnostics Introduction
Introduces built-in diagnostics and fault codes for efficient troubleshooting and service.
Understanding Fault Modes
Explains how faults are displayed (F/U codes, LEDs) and logged, including differences between Fatal and User faults.
Diagnostic Modes and Procedures
Details various diagnostic modes like Temperature Display, Rinse Aid Setup, Water Pressure, and Optical LED Download.
Diagnostics Quick Reference Flow Chart
Visual guide outlining diagnostic test sequences, including display, demo, hardware output, and continuous cycle tests.
Comprehensive Fault Code List
Lists and explains various fault codes (F1-F8, U1-U3), their LED displays, faults, and possible causes for troubleshooting.
Service Procedures
Drawer and Front Panel Servicing
Procedures for removing and replacing the drawer front, handle, LCD display, and front trim.
Component Removal and Replacement
Details on removing the drying fan, detergent dispenser, electronic controller, and wiring cover.
Tub and Internal Component Servicing
Instructions for removing the filter plate, rotor assembly, tub, locking ring, and motor assembly.
Lid, Seal, and Air System Maintenance
Guidance on lid assembly, lid seal replacement, slide runner replacement, and air pump removal.
Valve and Switch Component Replacement
Procedures for removing and replacing exhaust valve, water valve, flood switch, EMI filter, and tub microswitch.
Need help?
Do you have a question about the DS601 and is the answer not in the manual?
Questions and answers