Advertisement
Quick Links
Test Equipment Depot - 800.517.8431 - 99 Washington Street Melrose, MA 02176
TestEquipmentDepot.com
®
BLACKMAX
Digital Manifold Series
DIGITAL SERIES
us
Patent No. 9,043,161
OWNER'S MANUAL (English)
(Software Version 3.2 or Higher)
2 Valve Series: MD50, MD50HE, l\lll50VHE
4 Valve Series: MD100, MD100HE, MD100VHE
Advertisement
Related Manuals for CPS BlackMax MD100
Summarization of Contents
Quick Start Instructions
Initial Setup and Region Selection
Steps for installing batteries, powering on, and selecting the region.
Main Screen Display
Overview of the default status shown on the manifold's main screen.
General Safety Instructions
Critical Safety Warnings
Covers explosion, electrical shock, pressure limits, and vapor exposure risks.
Environmental and Regulatory Notes
Information on refrigerant discharge regulations and recycling.
Overview
Product Description and Safety
Details on design features, ruggedness, and safety sensor cavities.
Controls and Features
Button and Valve Functions
Explanation of the manifold's buttons, valves, and ports.
Accessory Connection Ports
Identification of ports for optional accessories like charger and vacuum gauge.
Optional Accessories
Vacuum Gauge, Charger, and Sensors
Overview of MDXVG vacuum gauge, MDXBX charger, and MDXCP sensor.
Initial Operation
Refrigerant and Temperature Settings
How to select refrigerants and view saturation, Superheat, and Subcool temps.
Thermistor Sensor Use and Power Off
Instructions for thermistor sensors and powering down the unit.
Setting to Zero Pressure
Zeroing the Pressure Display
Procedure to reset pressure readings to zero before use.
Pressure Hold Test
Test Setup and Duration
Steps to initiate a pressure hold test and set its duration.
Pressure Hold Test (Continued)
Performing the Test
Instructions for pressurizing, monitoring, and completing the test.
Vacuum Hold Test
Test Setup and Initiation
Connecting the MDXVG and starting the vacuum hold test procedure.
Vacuum Hold Test (Continued)
Evacuation and Test Execution
Evacuating to desired level and performing the vacuum hold test.
Vacuum Hold Test (Continued)
Finalizing Vacuum Test
Completing the vacuum test and checking for leaks.
Programming/Setting Units
Unit Configuration Options
Overview of changing temperature, pressure, and vacuum units.
Programming/Setting Refrigerants
Selecting and Changing Refrigerants
Procedure to modify the list of 5 favorite refrigerants.
Programming/Setting Temperature Units (°F vs. °C)
Adjusting Temperature Units
Steps to switch between Fahrenheit and Celsius temperature displays.
Programming/Setting Pressure Units (Psig, KgCm2, kPa, Bar, Mpa)
Adjusting Pressure Units
Steps to select preferred pressure units from available options.
Programming/Setting Vacuum Units (Mic vs. inHg)
Adjusting Vacuum Units
Steps to change vacuum display between microns and inches of mercury.
Enter Programming Changes
Applying Unit Settings
How to confirm and make selected unit changes the active settings.
Setting APO (Automatic Power) On or Off
Configuring Auto Power Off
Steps to enable or disable the automatic power off feature.
Connecting to an A/C System
System Connection Diagrams
Visual guides for connecting the manifold to an A/C system for MD50/MD100.
Recovering Refrigerant
MD50/MD100 Recovery Procedure
Step-by-step guide for recovering refrigerant using the manifold.
Evacuating Procedures
MD50/MD100 Evacuation Steps
Detailed procedure for evacuating the A/C system with the manifold.
Charging Procedure - Low Side
MD50/MD100 Low Side Charging
Steps for charging refrigerant into the low side of the system.
Charging Procedure - High Side
MD50/MD100 High Side Charging
Steps for charging refrigerant into the high side of the system.
Appendix A (Manifold Specifications)
Technical Specifications
Detailed specifications for pressure, temperature, accuracy, and size.
Appendix D (Battery Selection and Replacement)
Battery Recommendations and Installation
Guidance on battery types, charging, and replacement.
Appendix E (Cleaning Sensor in MDXVG)
MDXVG Sensor Cleaning
Procedure for cleaning the vacuum gauge sensor with alcohol.
Appendix F (Limited Warranty)
Warranty Terms and Claims
Details on warranty coverage, exclusions, and how to file a claim.
Appendix G (Refrigerants Stored in Memory)
Refrigerant List
A list of all refrigerants pre-loaded into the manifold's memory.
Appendix H (Error Indicator Screens)
Understanding Error Codes
Explanations for common error indicators like oP, SP, and Err.
Need help?
Do you have a question about the BlackMax MD100 and is the answer not in the manual?
Questions and answers