Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for Zodiac LM3-24
Summarization of Contents
Safety Instructions
General Safety Precautions
Covers electrical, chemical, water pressure, and child safety hazards for proper operation.
Product Information
How the Clearwater Chlorinator Works
Explains the process of chlorine production from salt water using electrolysis.
Water Chemistry Requirements
Details essential water parameters like pH, salt, and alkalinity for optimal chlorinator performance.
LM3 Product Specifications
Lists technical details including flow rate, operating pressure, dimensions, and power requirements.
Installation
Plumbing the Cell
Instructions on horizontally mounting the cell with correct port orientation and PVC connection requirements.
Flooded & Bypass Plumbing
Guidance for installing cell in flooded pool systems or using a bypass configuration for maintenance.
Multiple Installations
Advice on plumbing multiple LM3 units in series or parallel for balanced flow.
Installing the Power Pack
Steps for mounting the power pack securely and safely, including location and wiring considerations.
Wiring to a Controller
Methods for connecting the LM3 to pool automation systems via auxiliary relay or communications link.
Connecting the Communication Cable
Detailed steps and wiring configurations for interfacing the LM3 with various automation controllers.
Automation System Controller Interface
Configuring the LM3 for communication with specific controllers, including panel settings.
Status Warnings for Controllers
How the LM3 signals 'Check Salt' or 'No Flow' status to connected pool automation systems.
Operation
Control Panel Functions
Explains the operation of ON/OFF, OUTPUT, and SUPER CHLORINATE buttons on the LM3 control panel.
Control Panel Indicator Lights
Describes the meaning of different indicator lights on the control panel for unit status.
Startup and Operating Tips
Guidance on initial setup, including salt addition, and best practices for daily operation and efficiency.
Maintenance
Regular Maintenance Checks
Outlines essential weekly and monthly checks for pool water and equipment for optimal performance.
Water Chemistry Management
Advice on adjusting pH, total alkalinity, and other water parameters for effective chlorine sanitization.
Pool Chemical Usage Guidelines
Guidance on using algaecides, sequestering agents, and phosphate removers with the chlorinator.
Adding Salt to the Pool
Instructions on testing and adding salt for maintaining the correct concentration for the chlorinator.
How Much Salt to Add
Guidance on calculating the amount of salt needed to raise pool water concentration to 4000 ppm.
Adding Pool Stabilizer
Guidance on maintaining optimal chlorine stabilizer (cyanuric acid) levels for chlorine longevity.
Manually Cleaning the Cell
Step-by-step instructions for cleaning the electrolysis cell to remove scale build-up.
Resetting the Fuse
Procedure to locate and reset the resettable fuse on the LM3 power pack.
Preventing Insect Damage
Tips to prevent insects from entering the power pack vents and potentially causing damage.
Troubleshooting
Troubleshooting Guide
Solutions for common problems such as no chlorine residual, green water, or scale formation.
Warranty and Liability
Clearwater LM Series Limited Warranty
Details on the chlorinator's warranty coverage, duration, and exclusions for the original owner.
Disclaimer of Liability
Notes on material compatibility with pool chemicals and spa, and potential damage from chlorinated water.
Need help?
Do you have a question about the LM3-24 and is the answer not in the manual?
Questions and answers