Related Manuals for SolarMax 100TS
Summarization of Contents
About this instruction manual
Target group
Identifies the intended audience for the instruction manual.
Where to keep this manual
Specifies the proper storage location and accessibility of the manual.
Symbols used
Explains the meaning of symbols used throughout the document.
Safety instructions
Appropriate use
Defines the intended and prohibited uses of the inverter.
Description
Block circuit diagram
Illustrates the internal components and connections of the inverter.
External operating elements and dimensions
Details the external controls and physical measurements of the inverter.
Installation
Transport and storage
Provides guidelines for safely transporting and storing the inverter.
Siting
Specifies recommended indoor locations and environmental conditions for installation.
Lightning protection
Discusses requirements for protecting the PV plant from lightning.
Scope of delivery
Lists the components included with the inverter.
Inside view
Shows the internal layout and identifies key components within the inverter.
Mains fuses and minimum line cross-sections AC
Specifies recommended fuses and AC cable sizes for connection.
Minimum line cross-sections DC
Details required DC cable cross-sections based on the number of feed lines.
DC and AC terminals
Describes the connection points for DC and AC power lines.
Terminal block
Lists the external interfaces and connections available on the terminal block.
Commissioning
Switching on and off
Outlines the correct procedure for powering the inverter on and off.
Initial start-up (Initial Setup)
Guides through the initial configuration process upon first power-up.
Operation
Graphics display
Explains the functions and information shown on the inverter's display.
Menu button symbols
Details the symbols used for navigating the inverter's menus.
Main menu
Introduces the primary menu structure for accessing inverter functions.
Overview
Displays key operational values and the current status of the inverter.
Measured values
Lists the electrical and operational parameters that can be monitored.
Statistics
Explains how to access historical data like daily, monthly, and yearly yields.
Configuration
Details the parameters and advanced functions that can be configured.
Settings
Describes how to adjust communication parameters and monitoring functions.
Information
Provides device-specific details such as type, firmware, and startup date.
Data communication
Configuration of the data communication interfaces
Explains the setup for RS485 and Ethernet interfaces for data transfer.
Options
Scope of services
Outlines the features and benefits of the MaxControl service package.
Duration
Specifies the guaranteed period and renewal terms for the service package.
Accessory components
Lists optional accessories available for the inverter system.
Operating status
Status messages and status LED
Explains the meaning of status messages and LED indicators.
Booting
Describes the startup sequence and associated status messages.
Mains operation
Details the various states and limitations during grid-connected operation.
Communications activity
Shows symbols indicating data transmission via RS485 or Ethernet.
Troubleshooting
SolarMax Service Centre
Provides contact information and required details for technical support.
General troubleshooting
Offers steps to resolve common display or irradiance issues.
Warnings
Lists potential warnings and their causes, such as fan or sensor failures.
Failures
Describes common failure states like high DC voltage or missing mains.
Error
Explains how to handle internal device errors and error codes.
Blockings
Details reasons for inverter blocking, like main switch off or external commands.
Error messages during the initialisation phase
Lists faults occurring during the initial startup phase.
Maintenance
Maintenance by a qualified electrician
Step-by-step guide for electrical maintenance tasks on the inverter.
Maintenance by the plant operator
Outlines simple checks that can be performed by the plant operator.
Specifications
Specifications
Lists technical parameters, input/output values, and ambient conditions.
Efficiency curve
Graphical representation of the inverter's efficiency at different load levels.
Power derating
Explains how ambient temperature affects the inverter's output power.
Individual country settings
Details country-specific grid connection parameters and settings.
Need help?
Do you have a question about the 100TS and is the answer not in the manual?
Questions and answers