Table of Contents
Advertisement
Quick Links
600B691/08
INSTALLER GUIDE
F i r e l i t e
R e g e n c y
&
OXYSAFE 2
OXYSAFE 2
MODEL 3370
MODEL 3371
(GC No. 32-032-31)
C o n t o u r
OXYSAFE 2
MODEL 338
(GC No. 32-032-32)
RADIANT/CONVECTOR
GAS FIRES
THIS APPLIANCE IS FOR USE WITH NATURAL GAS (G20)
THIS APPLIANCE IS FOR USE IN THE UNITED KINGDOM (GB) AND
THE REPUBLIC OF IRELAND (IE) ONLY.
We trust that this Installer Guide gives sufficient details to enable the appliance to be
installed and maintained satisfactorily. However, if further information is required, our
Valor Technical Helpline will be pleased to help.
Please telephone 08706 061 065 (National call rates apply in the United Kingdom).
INSTALLER: Please leave this guide with the owner
© Valor Heating
Advertisement
Table of Contents
Related Manuals for Valor 338
Summarization of Contents
4 GENERAL INSTALLATION REQUIREMENTS
4.1 General Compliance & Standards
Adherence to instructions, regulations, and standards for safe installation.
4.2 Chimney & Flue Preparation
Ensure chimney is swept, clear, sound, and dampers removed for proper function.
4.4 Ventilation Requirements
Specific ventilation needs for UK and Republic of Ireland are detailed.
4.7 Appliance Clearances
Details required clearances from appliance top to shelves and surrounding surfaces.
4.9 Installation Situations
Details acceptable installation scenarios like fireplaces, wall mounting, and precast flues.
4.10 Suitable Flue Types
Lists suitable flue types including conventional brick, liner, and metal flue boxes.
5 PRE-INSTALLATION PREPARATION
5.1 Unpacking Instructions
Guide to unpacking the appliance and checking all components for damage.
5.2 Fireplace Flue Pull Test
Procedure for testing flue draft using smoke pellets to ensure safe operation.
5.3 Appliance Preparation Steps
Steps for preparing the appliance, including removing transit screws and checking ignition.
5.4 Fitting the Closure Plate
Instructions for fitting and sealing the closure plate to the fireplace opening.
6 APPLIANCE INSTALLATION
6.1 Hearth Mounting
Procedure for placing and levelling the appliance on a hearth.
6.2 Wall Mounting
Instructions for marking and securing the appliance when wall mounting.
6.3 Gas Supply Connection
Details on connecting the gas supply using rigid tubing and checking for soundness.
6.4 Radiants Installation
Guidance on correctly fitting the appliance's radiants.
6.5 Flue Restrictor Adjustment
Instructions for adjusting the flue draught restrictor if needed.
7 CONTROL & PRESSURE CHECKS
7.1 Control Settings Verification
Checking control positions and ensuring the pilot ignites and stays alight.
7.2 Flame Supervision & Spillage Monitoring
Testing the automatic shut-off system for flame failure or lack of ventilation.
7.3 Reference Pressure Check
Procedure for checking the burner pressure at maximum output.
11 SERVICING & PARTS REPLACEMENT
11.1 To Replace Radiant(s)
Step-by-step guide for removing and refitting the appliance's radiants.
11.2 To Remove the Outer Case
Procedure for safely removing the outer casing of the appliance.
11.3 To Replace the Pilot Unit
Detailed instructions for replacing the pilot unit assembly.
11.4 To Remove the Piezo Generator
Steps for disconnecting and removing the piezo generator unit.
11.5 To Remove The Complete Burner Module, Pipes and Pilot
Procedure for removing the entire burner module, associated pipes, and pilot.
11.6 To Grease the Gas Tap
Instructions for cleaning and greasing the gas tap mechanism.
Need help?
Do you have a question about the 338 and is the answer not in the manual?
Questions and answers