Table of Contents
Advertisement
PACSystems™ RX3i PROFINET Controller
IC695PNC001-BEBD
Firmware Version 3.20
1
Includes conformal coat and low temperature module variants, if available.
2
The last two characters of the catalog number suffix may not increment with every firmware release beginning with IC695PNC001-BCBD Release 3.15.
1 2
IMPORTANT PRODUCT INFORMATION
GFK-2573AB
Jul 2022
Advertisement
Table of Contents
Related Manuals for Emerson IC695PNC001
Summarization of Contents
Important Safety and Operational Notices
WARNING and CAUTION Statements
Explains the meaning and usage of Warning and Caution notices.
Product Overview and Ordering
PACSystems RX3i PROFINET Controller Overview
Describes the module's function, connectivity, and features.
Ordering Information
Lists product part numbers and descriptions for ordering.
PNC001 Specifications
PROFINET and CPU Compatibility
Details PROFINET support and RX3i CPU compatibility.
Power, Temperature, and Connectivity
Covers power, operating temperature, and port specifications.
Network and System Limits
Outlines LAN, IP/MAC addressing, and system maximum limits.
Installation and Safety
EMC and Installation Location Requirements
Specifies EMC requirements and suitable installation locations.
Installation in Hazardous Areas
Provides guidelines for installation in hazardous locations.
Module Status and ATEX Compliance
ATEX Zone 2 Compliance
Details requirements for ATEX Zone 2 environments.
PROFINET Status Reporting and Bits
Explains status reporting and defines status bits.
LED Indicators
LED Functions on the PROFINET Controller
Summarizes the function of each LED on the module.
Quick Start Guide
Pre-installation, Installation, and Network Connection
Covers initial setup steps and network connectivity.
SFP Device Installation and Configuration
Guides on installing SFPs and configuring the module.
Release History
Historical Software and Firmware Releases
Lists past versions and their associated changes.
Product Updates and Improvements
Module Upgrade Information
Details available upgrade kits and compatibility.
New Features and Resolved Issues
Highlights new features and problems fixed in releases.
Functional Compatibility
RX3i Backplane Hardware Compatibility
Specifies required backplane hardware revisions.
PLC CPU Firmware Requirements
Lists compatible PLC CPU firmware versions.
PROFINET Controller Version Requirements
Details required PROFINET controller firmware versions.
Hardware Comparison and Restrictions
PNC001-Bxxx vs. PNC001-Ax Hardware Differences
Compares hardware features between -Ax and -Bxxx revisions.
Operational Restrictions and Issues
Lists operational restrictions and known issues.
Command Line Interface Restrictions
CLI Command and Page Function Issues
Describes issues with CLI help, page functions, and command responses.
Operational Notes and Considerations
MRP Configuration and Network Traffic
Notes on MRP configurations and traffic handling.
Network Monitoring and Device Faults
Guidance on network monitoring and handling device faults.
Additional Documentation
Related Manuals and Resources
Lists supplementary manuals for further information.
General Contact and Support Information
Emerson Technical Support Contacts
Provides contact details for technical support and customer care.
Need help?
Do you have a question about the IC695PNC001 and is the answer not in the manual?
Questions and answers