Sangean DT-200X User Manual page 9

My Favorites
10
Lock Switch
11
The lock switch prevents accidental changing of
any of the radio settings.
• To enable the lock function slide the lock button
located on the right side of the unit to the up
position. When lock is activated there will be
this symbol located on the top of the display.
At this time no buttons should function.
• To disable the lock function, slide the switch
to the down position.
Belt Clip
12
A removable belt clip is provided on the back of
the unit.
Removal:
It can be removed by gently pushing on the center
tab of the clip where indicated, and sliding the clip
downward towards the bottom of the radio.
Replacement:
You can easily connect the belt clip by inserting
the top of the clip into the designated receiver slots
and gently pushing the clip in an upwards motion
towards the top of the radio.
Battery Compartment
13
8