Setting The Clock - Sangean DT-200X User Manual

Setting the Clock

This unit features a clock that will display the current
time while off. To set the clock:
• Turn unit off by depressing the power button
located on the top of the radio.
• Press and hold MEMO or CLOCK button until the
hour setting begins blinking and the colon is no
longer blinking.
• Select hour by using the Tuning Control Buttons
located just to the right of the display. Adjust UP or
DOWN accordingly until desired hour is displayed.
• Press MEMO or CLOCK button once to set the
minutes.
• The minute indicator should now be blinking.
Using the Tuning Control Buttons located just to
the right of the display. Adjust UP or DOWN
accordingly until desired minutes is displayed.
• Once time displayed matches desired setting
press MEMO or CLOCK button once more.
• Time should display solidly, with the colon
blinking periodically.
Auto shut off timer
For battery saving, this radio equips with 90 minutes
auto shut off timer. Radio will be turned off
automatically after 90 minutes of listening. You have
to turn on the power again to continue the listening.
To disable 90 minutes auto shut off device,
you can long press the power button for more than
2 seconds each time you turn on the radio until
display auto shut off symbol disappears.
1 1