Related Manuals for TRIMOS V600+
Summarization of Contents
How to start up?
Setting the probe constant
Procedures for setting the probe constant for measuring reversed surfaces or diameters.
Measuring heights
Steps for taking reference and measuring heights using the instrument.
Measuring diameters and centerlines
Guide on measuring diameters and centerlines using the instrument's functions.
Measuring with min and max mode
Instructions for measuring minimum and maximum values with the instrument.
Measuring with Delta mode
Steps for measuring the difference (delta) between two points.
Measuring of squareness
Procedure for measuring the squareness of a surface using a dial indicator.
Measuring with two references
Guide on how to measure using two distinct reference points (REF I and REF II).
Need help?
Do you have a question about the V600+ and is the answer not in the manual?
Questions and answers