Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for TRIMOS V8
Summarization of Contents
Safety Regulations
Important Information
General safety precautions and responsibilities for using the instrument correctly.
Security Symbols
Explanation of warning symbols used in the manual for hazard identification.
General Warnings
Detailed safety guidelines regarding electrostatic discharge, handling, and environmental conditions.
Instrument Description
Instrument Components
Identification and description of the main parts of the measuring instrument.
Interfaces and Connectors
Overview of connection ports like USB and RS232 for data transfer and communication.
Display Elements
Explanation of the display layout, status symbols, and function keys.
Setting Up and Getting Started
Packing List
List of all items included in the instrument's package.
Initial Setup Procedure
Step-by-step guide for preparing the instrument after unpacking.
Displacement Modes
Explanation of manual and motorized carriage movement options.
Setting into Operation
Instructions for turning on, initializing, and setting the reference position.
Main Measurement Functions
Selecting Measurement Types
How to choose between height and diameter/centerline measurement modes.
Height Measurement Details
Types of height measurements: downwards, upwards, and chain dimensions.
Diameter and Centerline Measurements
Procedures for measuring internal/external diameters and centerlines.
Using References
How to select references and assign preset values for measurements.
Probe Constant Setup
Setting and memorizing the probe constant for accurate measurements.
Min, Max, and Delta Modes
Operating the instrument in minimum, maximum, and difference measurement modes.
Advanced Measurement Features
Perpendicularity Measurement
Methods for measuring the perpendicularity of a surface using indicators or probes.
Measurement History (Buffer)
Accessing, navigating, and operating on stored measurement data in the buffer.
Distance and Centerline Measurement
Measuring distances and centerlines between surfaces not related to diameters.
Inverting Measuring Direction
Procedure to reverse the direction of measurement for positive values in both directions.
Display Modes
Customizing how measurement values are displayed on the screen ('Standard' vs 'Direct').
Temperature Compensation
Adjusting measurements for ambient temperature variations and thermal expansion coefficients.
Data Communication
USB Connection and Software
Connecting the instrument to a PC via USB for data transfer using TrimosDataTransfer software.
RS232 Connection Options
Connecting via RS232 for printers or PCs, including wireless transmission.
Remote Instrument Control
Command Attributes
Prerequisites and conditions required for executing remote control commands.
List of Remote Commands
Comprehensive list of ASCII commands for instrument operation and configuration.
Instrument Configuration
Probe Balancing and Force
Adjusting probe weight balance and measuring force electronically.
Reference and Probing Settings
Defining reference numbers, air cushion, probing filter, and SmartReverse function.
Display, Buttons, and Unit Settings
Customizing display lines, programmable buttons, and unit locking.
System Operational Settings
Configuring standby mode, buzzer frequency/volume, and start-up functions.
Instrument Information
Displaying serial number, firmware versions, and calibration dates.
Operational Procedures and Maintenance
Probing Techniques and Air Cushion
Best practices for probing, indicators, and using the air cushion for movement.
Motorized Movement and Battery
Methods for motorized carriage movement and procedures for battery replacement.
Instrument Reset and Cleaning
Procedures for resetting the instrument electronics and proper cleaning methods.
After Sales Support
Complaints and Repairs
Contacting agents for problems and transport precautions.
Finding Service Agents
Information on locating official TRIMOS service agents on the website.
Technical Dimensions
Dimensions for V3, V4, V5, V6
Graphical representation of physical dimensions for specific instrument models.
Dimensions for V8
Graphical representation of physical dimensions for the V8 instrument model.
Technical Specifications
Specifications for V3 and V4
Detailed technical data including measuring range, accuracy, and environmental conditions.
Specifications for V5 and V6
Detailed technical data including measuring range, accuracy, and environmental conditions.
Specifications for V8
Detailed technical data including measuring range, accuracy, and environmental conditions.
Declaration of Conformity
Compliance Statements
Statements declaring conformity with relevant directives and standards for the instruments.
Need help?
Do you have a question about the V8 and is the answer not in the manual?
Questions and answers