Table Of Contents - IBM CISCO MDS 9124 - UPDATE FOR SYSTEM STORAGE Update Manual

ESS ..............................................................................................................Page 3
DS8000..........................................................................................................Page 8
DS6000..........................................................................................................Page 13
DS4000..........................................................................................................Page 18
Tape..............................................................................................................Page 23
NAS...............................................................................................................Page 30
What has changed?
1. Updated NX-OS support with 4.2(3)
2. Updated Fabric Manager support with 4.2(3a)
3. Updated BladeCenter Cisco FCSM support with 3.3(4a)
4. NX-OS support for 4.2(3) will include p6 support for both System i and p.
5. Support for I/O Acceleration
Notes:
1. The MDS 9506/9509/9513 Multilayer Directors and MDS 9216i/9222i/9124/9134 Fabric Switches
level is 4.2(3). The latest FICON or Intermix fabrics
http://www.cisco.com/en/US/products/ps5989/prod_release_notes_list.html
2. Installation and upgrade information:
http://www.cisco.com/en/US/products/hw/ps4159/ps4358/prod_installation_guides_list.html
3. Product datasheets:
http://www.cisco.com/en/US/products/hw/ps4159/ps4358/products_data_sheets_list.html
4. Configuration Guides:
http://www.cisco.com/en/US/products/ps5989/products_installation_and_configuration_guides_list.html
5. Maximum ISLs (physical hops): 7 (maximum 1 Longwave ISL)
6. Blade module information:
7. Technical support on SAN Volume Controller (SVC) can be found at:
03.ibm.com/systems/storage/software/virtualization/svc/index.html
8. This SAN product line can not attach to public telecom networks and is not intended to attach to public telecom
networks
9. Note - Customers that do not require an upgrade to NX-OS 4.2(3), but require field updates, may install SAN-OS
3.3(4a). FICON customers that do not require an upgrade to NX-OS 4.2(1b), but require field updates may install
SAN-OS 3.3(1c)
10. The MDS 9216, 9216A and Supervisor-1 are not NX-OS compatible. SAN-OS 3.3.4a must be used.

Table of Contents

http://www.cisco.com/en/US/products/ps5991/prod_models_home.html
Cisco MDS 9000 for IBM System Storage Interoperability Matrix
firmware level is 4.2(1b).
http://www-
latest firmware
SAN-OS Release notes are found
Page 2 of 37