Advertisement

Quick Links

DISTRIBUTED IN THE U.S. BY:
DISTRIBUTED IN EUROPE BY:
DISTRIBUÉ AUX U.S.A. PAR:
DISTRIBUÉ EN EUROPE PAR:
VERTRIEBEN IN DEN U.S.A. DURCH:
VERTRIEBEN IN EUROPA DURCH:
DISTRIBUITO NEGLI USA DA:
DISTRIBUITO IN EUROPA DA:
DISTRIBUIDO EN LOS EE.UU. POR:
DISTRIBUIDO EN EUROPA POR:
DISTRIBUTEUR IN DE VS:
DISTRIBUTEUR IN EUROPA:
DISTRIBUÍDO NOS E.U.A. POR:
DISTRIBUÍDO NA EUROPA POR:
РАСПРОСТРАНЯЮТСЯ В США:
РАСПРОСТРАНЯЮТСЯ В ЕВРОПЕ:
アメリカ:
ヨーロッパ:
PARTS UNLIMITED
PARTS EUROPE GMBH
®
CONRAD-ROENTGEN-STR. 2., 54332
WASSERLIESCH, GERMANY
SAFETY WARNING: FOR YOUR SAFETY, IT IS IMPORTANT THAT YOU COMPLETELY READ THIS OWNER'S MANUAL AND ALL
WARNING LABELS ON AND INSIDE THE HELMET.
The instructions in this manual are designed to help you select the right helmet, wear it properly, take care of it and know when to
replace it. Failure to follow these instructions may increase your risk of serious injury or death in an accident. In order to get the most
protection possible from your helmet, you should always do the following – Wear your helmet when you ride, Handle your helmet
carefully to avoid accidental damage and ride safe. Do not take risks because you are wearing a helmet.
ICON® IS A REGISTERED TRADEMARK. ALL RIGHTS RESERVED. COPYRIGHT© 2022 LEMANS CORPORATION.
REPLACEMENT PARTS AND SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE. PRINTED IN CHINA.
Zhejiang Vista Sports Goods Co. Ltd. Made in CHINA DOT/ECE
DomainManual_5-05-22.indd 1-2
DomainManual_5-05-22.indd 1-2
DISTRIBUTED IN CANADA BY:
DISTRIBUÉ AU CANADA PAR:
VERTRIEBEN IN KANADA DURCH:
DISTRIBUITO IN CANADA DA:
DISTRIBUIDO EN CANADÁ POR:
DISTRIBUTEUR IN CANADA:
DISTRIBUÍDO NO CANADÁ POR:
РАСПРОСТРАНЯЮТСЯ В КАНАДЕ:
カナダ:
PARTS CANADA
®
NOT TO BE REMOVED EXCEPT BY CONSUMER
NOT TO BE REMOVED EXCEPT BY CONSUMER
TM
OWNER'S INSTRUCTION MANUAL
OWNER'S INSTRUCTION MANUAL
5/6/22 4:08 PM
5/6/22 4:08 PM

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the DOMAIN GRAVITAS and is the answer not in the manual?

Questions and answers

Summarization of Contents

Choosing the Correct Helmet Size
Measuring Your Head Size
Measure your head circumference above eyebrows and ears to find your size using the provided chart.
Proper Fitting
How to Check Fitment
Follow these steps to ensure the helmet fits snugly and is securely fastened on your head for optimal protection.
Chinstrap Fastening and Removing
Fasten Chinstrap
Learn the correct method for securely fastening the D-ring retention system and using the snap fastener.
Remove Chinstrap
Understand how to properly release the chinstrap using the D-ring retention system and red flag.
Using Your Helmet Correctly
General Usage Guidelines
Follow safety warnings to avoid injury, including not adjusting while riding, avoiding drops, and not wearing items under the helmet.
Inspecting Your Helmet Before Every Use
Pre-Ride Inspection Checks
Perform regular checks on the shield, shell, parts, liner, and chinstrap system for any signs of damage or wear.
Construction and Certified Protection
Shell and EPS Construction
Details on the pre-preg fiberglass shell and expanded polystyrene EPS liner, including dual density for impact absorption.
No Modifications Warning
Avoid altering the helmet's structure or component parts, as this can compromise its effectiveness and safety.
Comfort Liner and Performance
Comfort Liner Removal and Installation
Step-by-step instructions on how to remove and reinstall the helmet's interior comfort liner and cheekpads for cleaning or replacement.
Liner Installation Safety Warning
Ensuring the helmet liner is properly installed is crucial for intended performance and rider safety to prevent injury or death.
Venting System Airflow Profile
Venting System Airflow Customization
Learn how to operate the forehead and chin vents using simple switches to manage airflow inside the helmet.
Visor Removal and Installation
Visor Removal Steps
Detailed instructions for removing the visor by depressing stop tabs and pulling it out of its track.
Visor Installation Steps
Guide on aligning pivot posts, squeezing the visor into tracks, and locking it into place.
Helmlink Communicator Upgrade
Helmlink Communicator Features
Overview of the Helmlink Bluetooth communicator system, its features, and how it integrates with the helmet.
Communicator System Safety Warning
Be aware of local communication device regulations when operating a motorcycle for safety.
Care and Cleaning Instructions
Interior Cleaning
Instructions for removing and cleaning the helmet's interior lining using baby shampoo and air drying.
Shield Cleaning
Guidelines for cleaning the scratch-resistant, fog-free shield using only a clean, soft cloth to preserve its coating.
Exterior Cleaning (Gloss Helmets)
Steps for cleaning gloss helmet exteriors, including softening bugs and wiping down with mild soap and water.
Exterior Cleaning (Rubatone Helmets)
How to clean matte (Rubatone) finishes by blotting softened grime and avoiding aggressive rubbing.
Exterior Polishing
Recommendations for polishing gloss finishes with automotive wax and advice against polishing matte finishes.
Storage Recommendations
Store the helmet in its provided bag in a secure, dry place away from direct sunlight to protect it.
Advisory and Safety Warnings
One Impact Rule
Helmets should be replaced after any impact, as internal damage may not be visible and compromises protection.
Hearing Awareness
Be aware that helmets reduce hearing ability, necessitating heightened awareness of surroundings to prevent accidents.
Obsolescence and Disposal
Replace helmets showing signs of wear, damage, or after a limited lifespan to maintain safety.
Replacement Recommendation
Replace helmets every five years due to material degradation from use, oils, and environmental factors.
Used Helmet Disposal
Destroy old helmets before disposal to ensure they are not reused, preventing reduced protection for others.
Waiver and Release by Owner
Riders assume all risks associated with motorcycling; the user waives claims against ICON/LeMans for injury or death.

Table of Contents